Search results

Correct ! better use the IronX on dry car, more effect over the surface , water layer will dilute it more and make it less effective.

Its OK to use it over 1 year as well, we have updated the expire date for 2 years from production .

Thank you for the review very common problem with the smell is sniffing it direct from the bottle. we use cap and trigger and while changing to the trigger everyone cant resist taking a sniff and see how it smell. it will always smell hard from the bottle! its very concentrate this way the low...

No, not acid, pH neutral.

Guys sniffing right from the bottle always have the bad smell, please dont smell it from the bottle, hard to resist i know but pls try to smell after spraying it on the car or wheels, the area/room wont have the bad effect smell.

you can use it on your freshly paint, i guess passed 2 weeks dry from the day it was painted. should be ok, no problem at all.

OK i see where is the confusion, i mean when its undiluted , neat IXSS , its very strong solution it will affect oily waxes , diluted with water the pH will be about 7 and less to non affect waxes when using it with foam lancer if you want thick "heavy" foam, you need the less possible water...

No, its very thin layer of "glass" over the surface you wont see it or change your wheel color, here is a pic test from one of our guys in EU which left full bottle DLUX to dry :

on Foam lancer without any dilution and closed the valve completely for minimum water dilution while spraying, this way its the most effective soap and iron removing. IXSS will remove wax surface, it has alkaline cleaner base which will remove oily waxes, no polymers inside.

Dlux made for wheels too, will stand very high temp without degrading. on Aloy wheels as well or chrome.

Very Good review!, great job ! i think you are a master of glass polishing now, one thing i would suggest you, seal the glass! you can try the FlyBy30 glass coat we do. there will be much less water drops on surface with that grade of flat glass surface!

As some guys said here , the trick is quickly rinse off, on dark color car i would suggest even more dilution with water 1:6 ( 1 hydro2: 6 water) , dilution will degrade the fast reaction but still will work fine. another point, no need to spray too much and too close to the surface , few...

Hi Mike thank you for great informative review, i think you covered it all , and many guys will now be more relaxed using it. about the thickness measure, as you said its hard to take number since the paint doesnt have same measure all over, a good way to do it is to use laser point light ...

Game Changing Performance: CarPro Denim Orange Peel Pad Review - Autopia Forums - Auto Detailing & Car Care Discussion Forum

Very nice review and results!, thanks for the feedback about the question above, from our experience and measures each full pass( as the finished pics showed here) on a panel will remove 2~3 microns, with the denim pads, the velvet will remove less , velvet meant for softer paint btw. i believe...

i would try Tarx first, it wont affect the coating , neither Trix. spray it on a sponge it on the stain, if it doesnt come off you need to polish it and coat again. Avi

it looks like tar spots , kind of Naphta base oil, try removing with tar remover , scrubbing it. if it doesnt remove it, try apc neat. if still doesnt come off , you will need to polish it unfortunately. by hand polish with finishing polish it will come off.

yes no problem re-applying will be better even to apply on new car! , maintain the fresh rubbers this way

thats exactly the whole idea about this soap!, no wax , no gloss enhancers, no polymers, only good washing cleaner. thank you for the feedback.

all of our water based products are good for 2 years now. we will update the website.thank for the norice. that goes for Reload, PERL, Eraser, IronX family, TRIX , Hydro2 and So2pure