Search results

Hi, First thing, the limited edition bottle you got is same Reflect polish material, only the label print was made in 500 pcs . limited edition with opposite mirror print about the sealing, the cap we use for our polishes including the twisted sealing top, made for economic usage and exact fine...

Hi, i think its some problem of your application as well, you need to apply much more squirts over the surface , 1 mf wiping it on the surface sprayed and another one or dry side mf to wipe it off well, too thin layering will result shorter effect on the car. latest Reload has no problem...

Cquartz flash little slower now then CQUK , but not much, you need to feel the surface rather than looking if it flash, once it get tacky feeling , light sticky , start wiping off, at average 20C deg ( 68 F ) is about 1 min . waiting to flash , dry on surface will be too late and hard to wipe...

Coatings degrading by the abrasion you do on them, also how good is the coat depends how strong it bonded to the surface and how its good against chemicals we use on the car surface to clean it. doing another layer of coat after first was there for 6 months is fine just make sure tp clean ...

Hi, you did well, CQUK dont need flashing time , you can apply on and wipe off, doing even layer not too thick. work on small areas, like 50cm2 , almost WOWO , the sticky feel is the reaction of the coat , might be the humidity you had too so even if you wipe off right after its fine, using...

It will sure remove the rust from the surface , but if it wont be coated or treated anti rust , it will reappear again.

Thank you for your support, Hydro2 will not help preventing water spotting, its also sio2 base, Hydro2 is concentrated formula, you need to dilute it with water, you can do it in high power dilution 1:6 , or lower 1:10 for shorter sealing application , still durable enough.

Here is a great video review done in Australia by one of our customers one thing though , we dont recommend using the Gliss on top of the Essence Plus, since the ES+ is already suppose to be final step and hydrophobic. please watch in HD https://www.youtube.com/watch?v=lG6tWiL3pzc

We recommend using Reload ,Echo2, Gliss or Hydro Lite on our coatings , we dont recommend other brands which we dont know what is the chemical composition used in it.

EXACTLY !! Gliss ( means slick in French) made mostly to refresh back the slickness , hydrophobic, and water spots protection to the surface. it can be used alone for enthusiastic or entry coat, or topped any other coat. SUPER easy to use , almost wipe on - wipe off, and very economic . the...

The main thing we try to show with ClearCut is very low oily fillers , most cutting compounds use heavy durable fillers to compensate the heavy cut , to produce less hazy surface, longer work time .. thats one of the reasons ClearCut is fast cutting as well. ClearCut use special diminishing...

Cquartz UK is fast reacting , specially if room temp is above 20 deg C. you must work panel by panels , or with 60cm2 , flash time is about 1 min, no more, its almost apply and cover all area and start wiping, dont wait till surface is dry! , it will be very hard to wipe . even if surface feel...

The Gloss pad foam is made from Polyurethane , im not sure for what is made the cleaner you used but if it has strong solvent in it , it might laminate the soft foam, best way to wash these pads are air pressure or Tornado , dry cleaning, or worst case with low temp soap water wash.

Its not exactly streaking , since you can wipe it off eventually, all it need is to wait a little more to dry and wipe off with another towel. the dilution ratio can make such hazing , so best to do is minimum 1:10~1:15 ratio for waterless wash. if its dark or black colored car.

If you have or had any complain you can always contact me directly, we take very very seriously our customer service! and Carpro USA has one of the best customers service in the USA detailing market. beside them, im here and you can complain to me for any problem you have / had.

Hi, Hydrofoam will seal your paint already, no need to top it, unless you want extra sealing.

Your application is ok, i just would change the shampoo , Dawn uses surfactants to protect your hand skin these could be interfere if not rinsed well from the surface. if you see any streak dots, best tip is to spray some Hydro lite on mf and wipe on over the streaks it will remove the...

As written above , better use Eraser after AIO polish. Reload after will be fine its safe on glass too, spray few on the MF and apply on the glass.

Follow as mentioned above, we supply normal sealing cap, child safe and a spray trigger, once you finished using seal it back with the safety cap and nothing will drip or leak, IronX doesnt melt plastic

Strong APC with Magioc sponge will work well, APC with 12 pH , like Megs in low dilution , or even our Inside spray cleaner, with agitating the magic sponge on the plastic. solvents and alcohols will not remove it.