Search results

Oily waxes yes, sealants depend how good synthetic they are, coatings it doesnt affect at all ( at least not our coatings)

Great video!, the music makes it soo dramatic :-)

Great Decent review , thank you for testing!

1. What is the difference between Cquartz UK and Cquartz Ceramic ? I am applying in a shop the biggest difference is the flash time, CQUK made for cold temps applying, in hot temp, above 20 deg C it will flash almost instantly 2. Can a 30ml bottle do a Nissan GTR or a 4 door 750li BMW or...

If its coated with our coatings there is no problem using TarX on them, other companies i cant tell. you need to test. in any case after applying Tarx and removing the Tar wash it well from the surface. HTH

Great video! , well done im glad you like it :xyxthumbs:

Well said!, Thank you.

The anti static agent is very temporary and doesnt last long over the surface , no residues left, its only to eliminate the static electricity build up over the surface , thats why its no problem to use the Eraser prior to Cquartz or any other coating , wax even as well. HTH

Eraser doesnt leave anything behind! the small percent SLES is to break the oil residues from the polish, lift them up, the alcohol wipes all together from surface after.

Thank you for the review Nick You can use normal hose pressure too, results will be the same. yes its possible, touchless wash wont remove much dirt from your car if its too dirty. Not necessarily for coated car only!. any car it will be fine, you can see in Nick review there was nothing on...

Thanks for the feedback, car was coated before or waxed?

As said above and I would add , try to work at morning time , when less hot No, wont help , this liquid doesnt like humidity as the inside the fridge.

I mean to close for less water more foam. There is foam cannon which pressured by water only and there are the ones with air+water , like Karcher or others. we say with Air+water foam lancer its possible to wash as well your car , with 1:9 dilution mixture , ofcourse it will be slightly less...

We say there are two modes to use the Hydrofoam, by hand wash with dilution ratio of 1:9 ( for best effectiveness) or by air pressure foam lancer, like this : http://ecx.images-amazon.com/images/I/61Gp00zjzzL._SL1500_.jpg and to close the dilution valve to maximum when sprayed!!. foam cannon...

You can spray the whole car foaming, then wash it with wash mitt , then rinse of with the power wash changing the lancer . more easy than that? only avoid working under the sun, like any car wash you would have done. that was the basic concept for Hydrofoam. and you seal your car about 2~3...

I mean the application ! , not durability. the cure time or flash time is reflected by temp and humidity. the higher the temp the faster it react over the surface , so even if you wipe it off fast at high temp it doesnt mean durability is less. thats what i meant. the more easy coats are...

No , its vary only on the room temp and humidity its applied.

Again, the CQUK is made for cold temp applications, using it above 68deg F , you must apply on and wipe off in secs, no cure time almost. need fast movement . make sure you cover well the surface , not too thin , means prime well the applicator, too thin coat will flash faster. work on small...

Its great as maintenance wash and seal cars , good for coated cars, or waxed cars. not for cars who need to polish , or decon, its good for after polished . I think better not since it has sealant in it, so it react fast, claying takes you some time( maybe worth to try on small area). it does...

see my reply above , this is 1:100/120 dilution >>