Search results

Hi You can use it neat, but after applying you must wipe off the tire with MF cloth. dont leave it to dry after applying, apply and after few min start wipe off , even if its neat. i think thats why you get sticky surface. best dilution for tires i would suggest 1:1 with water. HTH

No problem , it will not damage them, avoid ofcourse as much as you can spraying on them but from our experience its safe to use on nylon or rubber surfaces

the main problem with streaking is on dark or black color cars on normal car paints if you are using very small amount you wont notice any streaks , Corey say correct , if you use 2~3 sprays over the panel you need to work fast and wipe on/wipe off using 2 MF , while you use the "wet" MF you...

Hi yes lately we launched the new Reload for 2014, AG has it in stock i believe as well. new version has more Silane in it and more bonding materials , durability will last much longer now and will resist better acids and alkyl base chemicals , between 4~12 pH i would say durability will last...

Glad it finely worked out for you, any more help you need just say...:-)

Reflect has very low abrasives, 4500 grit , its very fine polishing, most likely you didnt remove it, cquartz can be applied over cquk, no problem. wash the area well with soap it should revive the hydrophobic. keep us posted how did it go for you.

if you used too much pressure with your hand it could remove the coat, if not, try to soap wash the area , the beading should revive after the Reflect, if it doesnt bead , possibly you removed it. if you have cquk left , better coat again these areas after reflect, this time dont wait for...

Ironx will not help against these streaks , neither IPA APC will help to remove them. once you did apply Reload after over the area .

Hi Phil from what i can read the problem happened because of the flash time. since its more warmer weather now there is no need to wait for flash time. once you finished applying over the panel, start right after to wipe off the surface, no need to wait , even if it feels oily its ok. use fresh...

i mean if the trigger is old , the metal spring inside started reacting with the ironx liquid , these mostly are cheap springs which rusting easy made in china , this is the only reason it can change color inside the bottles. the triggers we use now , the past 6 months , are high quality ones...

Hi Nick Sorry but its not the latest version we just did.. the ones you have are maybe with the hologram sticker saying "Genuine CarPro 2014 " only bottles with the red sticker saying : NEW formula 2014 are the new versions. like this : soon will be available at AG as well

Check out your trigger, it has metal spring in it, if its oxidized this is the cause for the color change its not the mixing between both ironx lemon or cherry HTH

It will if you will close the foam gun valve completely, to let the minimum water goes in while foaming.

Hi if i will say to you yes it will, would you believe me? :-)) the best is to buy and test, its pretty cheap and effective without abrasives, no polishing required

yes it will be a waste, wont help removing spots, its not made for dilution. for such dilution to make it effective it would have to be extremely concentrated .:xyxthumbs:

No need to heat up the glass after flyby30 coating. its always good to heat up but without heating will work too just let it dry in the sun will be fine as well.

Hi you waited too long time for curing. CQUK react fast , and in high temp above 20deg.C even faster. the best way to know before doing whole car is to test on small area.: once applied wait few min. test it with your finger , if it feels oily wait another min. and test again. it should feel...

Hi are you sure you got the Cquartz Finest? since its not sold in public and only to authorised detailers if it is the Finest can you send me by PM where did you buy it? thank you Avi

It looks like you spray too much, really dont need much spritz on each panel, 2~3 maximum.. you need to use fresh MF, 1 for wiping on the reload, and another for wiping off, usually when you doing the whole car the MF get wet from former panels, so make sure to flip the mf to get Dry face while...

Yes i can confirm , it can work really well on poly-carbonate plastics as headlamps as well. primer target is glass of course , the plexiglas is extra advantage you have.