Search results

Thanks that is a big help.:xyxthumbs:

Chicago Pneumatic Cp7201p 3" polisher This is a great little polisher and have had mine for years. My backing plate has seen better days. Has anyone who has one of these replaced their backing plate, if so from were and what brand. CP backing plate is @ $30 a more than a fourth of the polisher...

I have used the Mikita for years and has worked great. I also have used the Milwaukee and was very pleased with it. I have a flex da and by the quality of it I would say you can't go wrong with a flex. I would try to get your hand on each one. Allot of choosing the one that is right for you is...

Has anyone used Surf City Beyond clay?

Check out caswell and their forum. Don't skip the steps talked about on that forum to get a deep polish. Introduction To Buffing and Polishing - Caswell Inc. Plating Kits Electroplating Kits Aluminum Anodizing Kits Powder Coating Systems Metal Polishing And Buffing Supplies - Caswell Inc...

Someone posted on another site that they have made one to sale. MixKwik - The Premiere Aerosol Can Mixer and Paint Shaker @ $24

Mother's has two aluminum polish, for a final polish their Billet polish is one of the best I have ever used, and I have tried allot. The billet polish has very little cut, it is only for the final step. The only thing I like better is English. :dblthumb2:(Metal polish for aluminum, silver...

If you think were you saw it let me know, I might be able to improve mine. I have seen worm screws with wide blades on the head to tighten it, I might try that . I have seen one that spins in a drill but I thought this was more like shaking.

I hate to shake up paint cans. So I took an old saws all blade and welded two worm clamps to it. Works great. :thumbup:

I have some need some more.:dblthumb2:

One thing to think about is to have a lift when it is up you can walk under it. Here is another pic of the view from my garage.

Thanks for the comments. Here is a couple more. I have 3 TVs, laid out like a triangle around the garage, that are hand me downs from the house. I like to be able to just glance up when I am working on something. It is insulated with a heater and air conditioner. I designed the house so that...

I have problem getting that right. The garage or my part of the house is 1300 sq ft. We don't go on big vacation we spend all of out time and money improving the place. We do all the labor ourself to save money.... just like detailing your own car plus you will always spend the extra effort when...

I love my lift propark 8 plus from direct lift. I have 11.5' ceilings. I use as much to detail my vet as to work on it. I have the hydraulic jack. You can use it many different ways.

If using a rotary it is even more important to tape edges and corners.

Autogeek pick me for a Flex Knife!

That is good news, no changes.

I was at Goodguys, talking to a 3M rep and he told me that 3m had bought Meguiar's. Said that Meguiar's still owned sales, I really don't totally understand. He said probably the only difference will be seen is a little 3M logo. H said that Meguiar's does really good on the consumer line. I...

It run like new. I try to blow it out often. It has been through lots of pads and back up plates. I wonder if the new version feels or works any different.:buffing:

Thanks, I have not seen that chart. AG chart did not have it listed and since I have been using Finesse for long time I wondered were it landed on the chart.