Search results

hey so i got a set of brand new hexlogic pads you guys think i can use them just as they are or i heard of some people spraying the pad with detailer spray or even a lil bit of watter. you guys think this is recommended or just load em up and go

hey guys quick question but let me tell you what i have already. DA polisher/buffer, hexlogic pads (whole set), meguiar's M105 ultra cut compound, meguiar's ultimate compound, meguiar's ultimate polish, meguiar's gold class liquid wax, meguiar's gold class paste wax, mother's MTECH instant...

hey so i was at the local auto part store and came across "turtle wax ice shine like sealant" i have always used wax so i was looking into trying a sealant and this was one of the only ones i came across so i figured i would grab one. before using i decided to see what every one thinks about...

hey guys quick question what is the best way to REMOVE wax/polish? basically what i did was use meguiars ultra cut compound (on a couple area's that really needed it) then went to ultimate compound , then ultimate polish, finally i used meguiars gold class paste wax. also this was all done with...

hey guys first off i just want to say i am somewhat new to this i have washed polished waxed before but i am new to using a DA polisher/buffer with some success. i have asked some questions with good results on this forum. So i want see see what you guys think about this. First question i am...

hey guys so i got anothing question. in the past i have always stuck with meguiars gold class paste wax. i am looking to trying some liquid wax or sealant for that matter. (NOT the thin liquid that comes out of a spray bottle i want the stuff that is thicker so you can put on a pad and a DA...

thanks

so has any one used these coatings i have used wax and sealants but never coating. how do they differ? also are they only sold online? i havent seen them in local auto parts store (i have auto zone , advance auto parts, and also a non chain store by me) i am getting very very curious about...

hey guys any one have any opinions on double sided tape? permanent/removeable strongest/ weakest or over all best/worst....i am curious as to what everyone thinks is the best so i got a direction to look in when getting some of my own

so this " cleaner wax or sealant wax" can go under the wax or should i use a different product for this. also does any one make a product that goes over the top of wax giving it a "seal"

hey guys so i got another question. Whats the deal with sealants? I have never used them but recently got a set of all the hexlogic buff pads and the softer ones says it can be used for sealants. So since i have never used them i asked one of my friends and he told me that they are used over the...

thanks yeh i really dont think its enough tar to harden and do anything like i said i didnt even notice it untill i had one (from another room) in my right hand and stained one in left hand and even then its hard to tell its soo light.. i think i am going to give them one more go in the wash and...

ok this might be a lil strange and ill probilly get more answers from people that smoke.....so any way i have had a few white microfiber cloths in my room for a while. and as any smoker knows if you smoke in a room eventually everything white gets a lil bit of a brown tint to it. this is what...

hey try a lil more water in the bucket. when i first tested it i got nothing but air and played around with the water level before i got it to the point where water is just below the "grit guard" (when it is pressed down not when its up) but also has to be higher than the pipes that come up...

ha couldnt wai till morning just finished and works great awsome idea! beats spending over $100

nice by the way the idea i had that sent to you in email with cutting back end of tee and zip tieing and all that ended up being simpler that expected.....the tee (the snap one with the piece missing at back end) i couldnt find so got the same tee but slip (w/o the snap missing section) and just...

does this new update have any positive or negitive results on the actual preformance of the washer as w whole? since there would obviously be more water in the system does this effect the spray either way good or bad?

hey guys quick question. i am having hard time finding "1" x 3/4" Tee (Snap X Thread)" (number 11 in the "parts and prices section")....now if i read the instructions correctly this piece isnt used for any actual water distribution. it is just a suport piece to hold up the rest of the...

hey guys so first i only read up to page 8 so if some one said this already ....my bad........but i just got all parts going to start assembly tomorow yesterday i also called "GRIT GUARD" and i saw some people saying they want that lil insert that goes in the middle of grit guard well it is...

so i asume bigger one beter for finishing or no? i going to get a whole set of hexlogic so gota me all the same size