Search results

Actually maybe I just tape off the area and hit it with reload. Then use reload at end of each wash on grill only.

Because it was my first time using CQ, I started pretty slow. My 45 min alarm went off after the trunk and first rear corner panel. So I just went back and re-did them. After that I picked up sped but basically broke the car up in 4 sections and did second coat before starting the next. I...

Good to know. Thanks for the tip. So I assume after 4h GLISS doesn’t have the haze issue and CQ is far enough along. given this is my first time with CQ I’m not sure I’ll be done the first coat of within 60 min so may need to wait over night.

Perfect. Thanks for the advice. What had be guessing was the CQ instructions. Says second coat 45-60 min after first, otherwise wait a day. However GLISS says wait 4h. Just seemed like there must be. Cure time somewhere between 60 min and one day, but GLISS is fine but after 4h. ill drop...

Thanks. I’m planning two coats of CQ and then will wait 4h and do earaser then GLISS.

I’m putting on CQ 3.0 today and plan to put on GLISS as top coat. It’s not my DD so I can either let CQ cure for a day and then GLISS or just the 4h min. In fact I can leave the CQ to cure all week if there’s any benefit as it’s in a garage. my question is whether there is any benefit to...

Thanks. Similar to my paint, the dealer apparently applied some coating. However that would have been probably 6 months ago or more given what I know. My guess is that’s gone, but I was planning to just use a leather cleaner first like Gyeon Mild.

Is it ok to use a leather conditioner before applying CQ leather? Looking at using pinnacle conditioner first on new leather, before applying. Or is it even needed on new leather?

Thanks. Planning to use it this weekend so wanted to be sure before opening it up.

I just received an order of GLISS. It said it was supposed to be V2, but it’s in the older V1 box from what the Carpro website shows. However, on the box is a V2 round sticker, and a tag on the bottle that has a date from October 2018. Anyone know if the V2 was/is sold in the original...

Any suggestions for how many passes with m205 to just take off whatever this ResistAll is?

I read M205 oils would need to be removed. I’m assuming Eraser will take car of it.

When I found the Mustang with options I wanted, it had one I didn’t. Dealer applied ResistAll coating. It seems somewhat okay, but when washing water just doesn’t bead off, like I’m accustom to. Long time Zaino user, but planning to put CQuartz on it. After IronX and clay, I was planning to...

Replace Chevy Silverado above with mustang, and it matches my experience exactly. I refused to pay for an add on I didn’t want. Today when I did first rinse since purchase, it seemed like there was some water repelling, but not a lot. After wash, the $899 coating seems to have disappeared...

I have gone over it with a light and its really hard to find any swirl marks, excepts a few on the roof. I was planning to just use M205 wherever I did find a swirl, and then compare to the rest fo the car to see if it really needed it. However the more I read here, the more it is suggested to...

The reason I wanted to polish was to apply cquartz UK. Why would a coating/seal be bad after polish?

I had dealer touch up a ding when taking deliver of a new car. They said they had to blend door and quarter panel paint as it was right on the door jam ridge and I side of door. I cannot tell the extents, as it looks factory new. They only had the car 48h. Should I wait some period before...

I hadn’t even thought about this, but one wrinkle. When I took delivery I noted a chip in the passenger door jam. Looked like someone had closed door with seatbelt in the jam and chipped door and door jam right on the edge between jam and exterior panel. Dealer said they would address it...

Thanks. I may hold off on the reload then as it will be in the garage and I can leave it in there as long as needed.

Thanks. From all the posts, sounds like I’m good with my original plan. Here’s what I’m specifically planning now. A. Wash down with Reset B. Iron X C. Clay Bar. D. M205 Polish with Blue LC pad E. Eraser wipe down F. Apply 2 x CQuarts UK 3.0 G.Apply Reload