Search results

Don't rub! Just slide your mitt across the paint, the sealant or wax should allow dirt, dust, crap, etc to slid off/rinse off. No pressure is needed, just use a good wash mitt or sponge and a good soap. With the soap, you should have no resistance when you drag the mitt over the paint. For...

Yea! That should do the trick. :) Good luck and post pictures when you're done!

Since you have a new Honda, you really shouldn't have a reason to go past something like Optimum Polish. If you only have swirl marks, try a finishing polish like Zaino Z-PC, XMT1, etc. first! I only say this because we have two Hondas, an '02 and an '07 Accord, and the paint on both of the...

I second that. How is the slickness of OS? :)

I would go to a body shop and ask for a bottle of the paint code on your door. Also, make sure to layer it up, spot wet sand with 4000 grit sand paper, then polish. Also, be careful! I used the touchup paint provided by Honda and it was DRAKER then the paint. :eek: So I'm going to try to take...

Autogeek Surprise Package!!

Pick Me, I love DP!

Like Rally said, you can do it yourself. Installing a clear bar involves a bit of practice (headlights are a good place to start) and patience. You could do sections at a time, such as your hood one day and then your headlights the next and then the fenders and so on. Also, check out xpel.com...

I was looking at the DP Pad Rejuvenator, too. The Pinnacle combo is almost the same cost but covers conditioning and cleaning! I tried hand polishing with a foam pad applicator and Z-PC and didn't have any conditioner, at least at first, it was awful! I can only imagine what a pad would endure...

Awesome. Guess I'll have to order some! :) Thanks again!

Hey!! It's my first post. :) Anywho, I was just wondering if any of you have used Pinnacle's (XMT) Pad Cleaner with the Edge foam pads? I wouldn't be concerned with using the product except for the adhesive within the pad. Will this pad cleaner cause any damage to the pad or hinder its useful...