Search results

I have the 1st of the two and it works well, but is not good for photography, as the numerous LEDs cause a starburst type effect in photos. I have a single head version of #2 that I use more frequently The two headed version you posted a link for would be more difficult to transport if the...

That longer extension will be a nightmare on a PE8. I don't even use my short extension with it anymore. Even at speeds 1-2, with a wool pad, it is difficult enough to utilize properly. I use my little HF pneumatic with 2" pads or PC with 3" Megs DAMF

The PE8 gets very hot when operated with 5.3" and 5.5" pads. I do not think it is advisable to use it with pads larger than 4" for an extended period of time.

I Highly Doubt the condition of the rim was a direct result of any tire shine product

Srpurdy, Have you used a GritGuard? What is your current method for removing particulate from your wash mitt during your washing process?

Based on the products and tools you are using Nd the amount of paint you are removing...I suspect the Culprit is that your arm speed is too fast to allow the products to work effectively. I could be wrong I was once before

$5 trim tool from Harbor Freight Pop the liners off Have at it You may get better results by spraying with APC and then laying a damp MF towel on it to increase the dwell time before it evaporates. Plastic razor blades work well too. When you are done and 100% clean...coat them with...

How do you like the MF Madness Wash Mitt?

Repeat....buy new trim! If you are planning on prepping and painting those trim pieces while they are still on the vehicle; it is not going to turn out well.

Did you spin them on you polisher 1st?

For $50-80 just replace the door moldings The wheel needs professional re-finishing

Glass pads take a beating I don't expect them to last more than a few hours of polishing

Since you are not holding back...I will not either Skipping Claying on a paying Customer car is Shady You are leaving behind embedded contamination that will lead to accelerated failure of the clear coat That being said...I have tried to skip claying on vehicles that were very lightly...

Nothing on the Mother's website

Ouch GSKR

This polish aggressiveness chart may shed some light on where your product choices lie on the scale. Autopia Forum - Auto Detailing & Car Care Discussion Forum

Close-up Photos Please

Bold Statement! Do you have any 50/50 photos of your results with HD SPEED? I bout it months ago but everyone I talk to chooses a two-step polishing process.

I would be surprised if your B-Pillars were clear coated Most seem to be solid black plastic and polish out really well Unfortunately, they are very soft and tend to mar very easily Meguiar's Ultimate Polish on any machine or even by hand will yield pleasing results Be sure to post Before &...

15 hours is not out of the question at all If you are going for 95% defect correction This Testarossa took 12 hours...rinseless wash, M100 w DAMF on FLEX 3401, CarPro Reflect w White LC Hybrid, Essence w White LC Hybrid as LSP Top of rear fender. Single Stage Paint