Search results

I just did this white Palisades, the owner loves it! Sent from my SM-N986U using Tapatalk

Do your large painted panels with chemical and use a clay mitt on other areas. New cars won't have much on vertical panels but the hood, roof and top edge of fenders will have fallout Sent from my SM-N986U using Tapatalk

It's probably from the water after rinsing the cleaner off causing rust. There is a product that will stop this but I can't recall the name right now. But I don't think the issue is the wheel cleaner itself. Sent from my SM-N986U using Tapatalk

If you are around Chicago I'd be happy to give you a hand. I have tools and a bit of knowledge to assist. Sent from my SM-N986U using Tapatalk

Do you have photos and what dilution were you using. Is there aftermarket tint on the glass? Also, when wiping interior, spray into tbr the towel then wipe. Generally onr or water is enough. Sent from my SM-N986U using Tapatalk

Premiere is good for 4 to 6 months in most cases. I've seen it last as long as 8 to 9 months with a small amount of protection left. Be sure you use a panel wipe before application for best results and make sure the panels are cool. Sent from my SM-N986U using Tapatalk

Eating/drinking is permitted in the family hauler. My G8 and Jeep, water only. Sent from my SM-N986U using Tapatalk

Put plastic down and blankets over the seat bottoms if you think it could get that messy. Sent from my SM-N986U using Tapatalk

Megs D156 xpress wax. Safe for interior pieces, trim, glass, leather, plastics. Sent from my SM-N950U using Tapatalk

Forgive my ignorance, what is the megs product you are referring to that you diluted with Collinite 845? Sent from my SM-N950U using Tapatalk

Have you tried polishing them to minimize how noticeable it is? Sent from my SM-N950U using Tapatalk

[email protected] Thank you sir! Sent from my SM-N950U using Tapatalk

It happens to a lot of us, driveway detailers, semi professional and full time guys. Always wanting to try new stuff or the ooooh a sale bug hits. Sent from my SM-N950U using Tapatalk

Megs degreaser at 5 to 1 spray and let dwell. Use a plush mf towel soaked in rinseless solution and wipe away grime and salt. Once clean lay a quality sealant on clean paint. Sent from my SM-N950U using Tapatalk

Use a polish on the hood next if you don't have a paint gauge. Not sure how much you have already taken and the hood will be one of the first panels touched by salesman and customers so leave as much clear as you can. Sent from my SM-N950U using Tapatalk

Your after looks pretty good, I'd hit that with a polish and see how it looks. Are any of the scratches under the clear from the body shop, I've seen that before. Lastly, remember a lot of the stuff you see most folks wont and as the car is in the showroom and people touch it your work...

Once a month or 6 weeks use a product that has heavier cleaners rather than ph neutral. This will help release the traffic film (not the same as bonded contamination from brake dust etc). Then move forward with your sealant. Only polish if you are going to clean, clay, then polish, degrease...

Thanks gents, followed up with the owner and he said he's been getting tons of compliments since getting this done. Definitely proud of this one! Sent from my SM-N950U using Tapatalk

Wow that is gorgeous!!! Sent from my SM-N950U using Tapatalk

Before and after over head shot as suggested by Mike. T his was a great idea, thank you sir! Sent from my SM-N950U using Tapatalk