Search results

  1. Jeff at Gyeon

    Spotting frustration

    Sweet! You will love SYNCRO. The SKIN top coat is fantastic. Glad to answer any questions!
  2. Jeff at Gyeon

    Spotting frustration

    The potential for water spotting is not GYEON specific. I would definitely recommend going over the necessary maintenance for all coated vehicles. Water spotting is more of an issue within the first week of installation, as it is with all coatings, as they are not fully cured. This is where Q2M...
  3. Jeff at Gyeon

    CanCoat Application Problems

    the microfiber towel is recommended because of the speed in which the product is applied to the surface and the speed in which the carrier solvent begins to evaporate. You can use a small suede applicator but it will slow down the process and the product will likely remain on the surface a bit...
  4. Jeff at Gyeon

    CanCoat Application Problems

    You can apply any wax or sealant you'd like over a coating. It will not degrade the underlying layer. However as stated below you will experience the performance of that outer layer in terms of gloss and hydrophobic properties while the coating is still there doing its job with UV and chemical...
  5. Jeff at Gyeon

    CanCoat Application Problems

    Good Morning! If soaked immediately in an APC mix and then washed you can get a few uses out of a MF towel. For me, I always use a brand new towel for coating application of any kind. It is worth it to me to know that the towel is going to perform its best, absorb excess material effectively...
  6. Jeff at Gyeon

    GYEON Coating Maintenance: Bathe+ vs WetCoat vs Cure

    Great to head that SYNCRO is performing well!! Yes any over the above maintenance products can be used over SKIN. They should be used every few months to keep the coating rejecting dirt and contaminant as effectively as possible. In the meantime, just regular washes with BATHE will keep it...
  7. Jeff at Gyeon

    Shelf life

    Hi Pat, Shelf life unopened is 1 year when stored in a cool place out of direct light.
  8. Jeff at Gyeon

    Gyeon Primer vs Polish

    Good morning! Sounds like Primer was worked a bit too long and with a bit too much pressure? Subaru paint is historically finicky in terms of its temperature tolerance. I have done this many times. If the polish is overworked and too much temperature is created then the paint will grab on to the...
  9. Jeff at Gyeon

    Mohs vs Pure

    Good Morning! Two very different products, both awesome. PURE is a different chemical makeup completely than MOHS so will have different install and performance characteristics. PURE is designed as a single layer, but can be layered up to three layers max. It will feel "thicker" than MOHS and...
  10. Jeff at Gyeon

    Mohs vs Pure

    Yes the entire GYEON quartz line is sold on AutoGeek and Autopia.
  11. Jeff at Gyeon

    Applying Skin Down the Road

    Good morning! Yes you can use the remaining SKIN down the road as needed. Good wash with Bathe, Iron decon if you'd like, Prep, and then on with SKIN. I would start with a light amount of SKIN in terms of how much product per areas and work your way up to the sweet spot.
  12. Jeff at Gyeon

    Jeff when will skin be available for sale

    Good Morning! I have not heard of any plans to release SKIN as a stand alone product. We are approaching SEMA and AutoMechanika so you never know what will pop out. The factory keeps everything pretty close to the chest until it is finished and packaged and ready for release.
  13. Jeff at Gyeon

    CanCoat Application Problems

    No problem! I think you are on the right track. Once you tweak that process I think you will really enjoy it. And I totally get the feeling of it not cooperating!
  14. Jeff at Gyeon

    CanCoat Application Problems

    Hey Guys! Glad to jump in and offer some advice. Great response above which covers much of it. CanCoat is very different in design from other coatings. It is not meant to be applied heavy and it is not meant to let dwell on the paint. There are 200 ml in each bottle which does not fill it...
  15. Jeff at Gyeon

    Suggestion to Gyeon

    Thank you for the feedback guys! I will gladly run it up the flag pole!
  16. Jeff at Gyeon

    Syncro Sold Itself

    The communication did come straight down from GYEON that the towels are 70-30. And there are likely some several year old product descriptions floating around that we need to clean up.
  17. Jeff at Gyeon

    How To: GYEON quartz Q² Trim

    No you would not want to be applying TRIM over Solution Finish. We want a pure bond between the coating in the plastics with no other product in between.
  18. Jeff at Gyeon

    How To: GYEON quartz Q² Trim

    Awesome!!! Looking great.
  19. Jeff at Gyeon

    Made a video showing CanCoat on my Infiniti

    Correct, Booster is a Fluorine based top coat that is more of a chemical reaction with the underlying coating (any high quality coating) to increase surface tension and increase water contact angle. It is best when used before the underlying coating is fully cured. It can be applied down the...
Back
Top