Search results

I am trying to remove some clear film that is on the windows above the doors. I used Stoner (the aersol spray) and could not remove the film after 2 applications. I cannot tell if its on the inside or outside of the windows. What is this film and how do you get rid of it?

How do you use an air compressor to apply?

How do you apply this? Use it right out of bottle or dilute it 1:1? I use a wheel applicator sponge and some product does get absorbed into the pad so this 8 oz bottle does not look it will last very long. This looks to be an expensive product for the amount you get compared to other...

Thank you for the detailed information. :dblthumb2:

Thought Wet Glaze 2.0 was almost the same thing...

I use Meguiars Gold Class, CG Maxi Suds II, and CG Glossworkz. I want to try DG 901 and/or possibly a Dodo Juice soap. Is the CG Glossworkz comparable to Dodo Juice sour power? How does BTBM compare to Basics of Bling for those of you that have used it? I am not questioning Dodo Juice b/c...

Just found out that DP Wheel Glaze has a cleaner in it so that may take off the PBWS. Going with my original plan. Going to spray Opti-Seal or UPGP on top of the PBWS. I really like the idea of a spray sealant. I am sure someone is going to say it wont bond correctly but I am going to...

Thanks - thats good to know. I may try a coat of the DP Wheel Glaze on top of the PBWS becasue I am sure I will notice the same thing as OEM brakes on both BMW's and Audi's do dust quite a bit. I do not want to change to aftermarket ceramic brakes as they are known to squeek so I really want...

Thanks for all the replies - I bought the Poorboy's Wheel Sealant becasue I heard it was good stuff and then after that I read that some people were saying that there are even better wheel sealants (like a true paint sealant like Opti-Seal/UPGP or Cquartz/Opti-coat) so I began to wonder if I...

I applied 3 coats (24 hrs between coats) of Poorboy's Wheel Sealant on my 18" silver CSL clear coated wheels and it took a looong time. I am learning that there are better wheel sealants on the market, however I do not want to remove the sealant I just applied because it did take a while to...

Have Pinnacle Souveran paste wax that I am going to use after I do the paint correction. So for now, I have been using CK CMW, Meguiars #26, and Victoria's Concours Red Wax. I like the look of a freshly waxed car so I usually wax the daily driver every 2 -3 weeks - this car stays outside...

Do you have these on your car? After market ceramic brake pads on BMW's have been know to make noise (even after proper break -in) when rolling to a stop - so do they squeak at all?

Have you compared the Poorboy's wheel sealant to a regular paint sealant such as opti-seal like others are suggesting?

Would you say that WGDGPS or Opti-seal would work better at repelling brake dust than Poorboy's Wheel Sealant?

Okay I was thinking you could use 1oz of opti-clean to 2 gallons of water and use this for a rinseless wash. So with Optimum's line you would need 2 products (ONR for rinse less wash and Opti-clean for a waterless wash)? Trying to see if you can do 2 different things with one product.

I am going to get either UWW or Opti-clean. Since you have used both, not taking into consideration that UWW is a better value, which one do you prefer and which one gives a better gloss?

nice - read the review and looks like a good product (opti-clean) that I will try. So it looks like Opti-Clean can replace both ONR and OID...

+1 used it on warm paint in the sun - no streaking. Added a nice gloss where I did not need to go over it with FK425.

Wow - 16oz of UWW makes 5.5 gallons - thats almost too goo to be true. I mean how is the gloss compared to Opti Clean or Poorboys S&P or a QD like FK 425? I would think that at such a diluted level (16oz makes 5.5 gallons) that it would not look as good as the others mentioned.