Search results

They can be removed but it may not be possible to remove them with it in the dash.

Looks great. If you want maximum durability out of the wolfgang i suggest letting it cure the recommended 12 hrs next time.

I would try a apc like meguirs and try to only get it on the tires. Im not sure how much effect it would have on a sealant but if you monitor the beading on the wheel you should be able to reseal your wheels when they need it.

I was under the impression she was using a wheel specific wax. If not using a wheel specific wax then you should use a sealant as supercharged said but you should still use your normal wash soap for longer durability.

Any wheel cleaner will remove wax. Use car soap and water but with waxes they need to be reapplied fairly often.

You need to do steps in this order or you will have problems: 1.Polish 2.Sealant (Wolfgang-1 or 2 coats with time to cure between) 3.Nuba (Souveran 1 or 2 coats if desired with time to cure in between)

Like i said. Completely wrong.... Thanks for clearing things up rocket.

They all look amazing. One day i hope to be able to work as well as you.

My first guess would be the wax causing moisture build up when not fully cured during quick temperature changes. I could be way off though....

Once you are done with your first pass you should only need 3-4 pea sized drops of polish. How much are you using and what kind of polisher are you using?

Re: hey guys. I have an SSR here at my place that i have as long as i want. It has so You said it left swirls in the paint. Did it leave any type of swirls or only holograms? If there were only holograms the paint should be completely defect free minus the haziness. If not then the IP wasn't...

First of all clay is not abrasive in any way when used correctly with a good lube nor does it contain abrasives. It simply pulls contaminants away from or in some cases does sheer off the tops of the contaminants due to the texture of the clay. Some clays are more harder than others to remove...

Should be on the product page right above the price.

Wow. Great turn around. How long did it take you?

I seriously doubt it. On the other hand if you apply it correctly and it all evaporates are you really getting anything from buffing it?

I started out with the same products minus the DGPS. Start with the white pad and TSR first. Then check to see if all defects were removed. (Halogen lights or another form of strong lighting is almost a must unless you want to be pulling it into the sun after every panel) If all the defects...

Amazing Roll Off i believe. Spray on Amazing Roll Off and watch the dirt roll off!

I highly suggest contacting Meghan. She took care of my pad problem quickly and without any hassle for me.

Im guessing you havent already bought your sealant. If this is the case i would highly suggest Duragloss 105 topped with collonite or any other carnauba wax. For the best durability use 601 polish bonding agent before it. It has great looks by itself and very nice durability.

I recently tried dp exterior cleanse all dilutes 1:1 with a stiff bristled brush and i liked it.