Search results

Thanks for the suggestions..... After doing some searching I ended up ordering the following cover minus 10% for $175.00 yesterday. It's a small investment which will hopefully help my situation. I do plan on building a garage in two to three years. I'll let you all know if I made the right...

Expensive lessen learned........ Hopefully this thread will save someone the trouble and $$$. Thanks again, Ray

Thanks to all for all the great suggestions! I'm going to try to find a good truck cover for now as suggested. I do have the sap/dust/dew problem which is a PIA along with a ton of work. Living in Michigan this problem only seems to exist about three to four months until the leaves fall. I know...

Thanks for all the great replies....... The sap from the maple trees comes off fairly easy, but...... as most of you know the longer it sets the worse it is. In my case, it was collecting for a couple days along with overnight dew and 82 degree sunny days. I thought I had all of it off upon hand...

Lesson learned........ I tried cleaning it with glide & pad cleaner without any luck then turned to the B&G remover. I must agree, the B&T remover is more than likely the culprit. If it happens again, I'll use soap and water and keep repeating if necessary. Thanks for the input to both of you. Ray

Well...... I used my Medium Nanoskin Autoscrub Pad today after washing maple tree sap off my 2015 GMC truck. Surface seemed to be free of sap, but the pad became sticky after a few panels in which I couldn't get it cleaned. I even tried Stoner bug & tar remover on the pad along with pad cleaner...

Wow!! Thanks for all the replies...... I ordered some Detailer’s Pro Series Polishing Pad Rejuvenator to try. I'm also going to try the Purple Cleaner. You folks are awesome, thanks again. Ray :dblthumb2:

Thanks for the replies........ Great choices. Keep chiming in. Thanks again, Ray :xyxthumbs:

Hi, I have Wolfgangs Pad Werks Polishing Pad Cleaner which works very well by hand. Now that I have a pad washer, I'm looking for an alternative to all the expensive pad washer cleaning solution mixes. I have quite a bit of the Wolfgang pad cleaner, therefore I plan on spraying it on the pad...

Just got done making mine...... Just under $50.00 for everything. I cut and put it all together in about 30 minutes. I did use a mitre saw for cutting. Works awesome!! A HUGE Thanks to you. Ray:dblthumb2:

Just got done making mine...... Just under $50.00 for everything. I cut and put it all together in about 30 minutes. I did use a mitre saw for cutting. Works awesome!! A HUGE Thanks to you. Ray:dblthumb2:

Awesome review!! Can't wait to get my hands on one.... As always, a big thanks to you. Ray :props:

Hi, thanks for the reply....... I just ordered the following; Menzerna Power Finish PO203SQ Menzerna PO85RD Menzerna Power Lock I know the above has a little less cutting power, but I thought I'd give it a try with a white pad and/or orange one. I agree that...

Hello, anyone out there.......Feed back please

Hi, Been reading about the Menzerna line of products. I currently use the Wolfgang Trio. This has been awesome on my red Goldwing trike & trailer. I know the majority of you (me included) prefer to stay with one system or another in regards to manufacturer. I understand that Wolfgang is made by...

Hi, I'm getting ready to purchase the Grit Guard Pad Washer. I have some questions for those who own one; 1) I would like to know if you have ever used Wolfgang Pad Werks Polishing Pad Cleaner with your grit guard pad washer? I have gallon of the PPC. 2) How was the results? Did you add...

Hi, Thanks for the replies..... +1 on using the least aggressive pad/product to get the job done. I believe starting on a horizontal panel section such as the roof would be a good testing ground. I'll probably need to get a little aggressive on my fiberglas tonneau cover due to the water spots...

Great article..... I live in Michigan and normally use the Wolfgang trio every 4 to 6 months. After reading throughout the forum, I understand the WPPE "is not" needed if using WTSR due to it removing the old wax/sealant. With that being said, I do have a couple questions; 1) If no swirls are...

Hi, I started using the Wolfgang trio last year (as a newbe) which worked fantastic on my red Honda Goldwing trike. The trike had some light/medium swirls in the paint which is now very close to being non-existant. Now i'm about to tackle my BLACK 2012 GMC pick-up. It does have some swirls, with...

Hi, I started using the Wolfgang trio last year (as a newbe) which worked fantastic on my red Honda Goldwing trike. The trike had some light/medium swirls in the paint which is now very close to being non-existant. Now i'm about to tackle my BLACK 2012 GMC pick-up. It does have some swirls, with...