Search results

It will slightly in the same way a good glaze and wax will. HUMP

I used plastic razor blades and 3M Adhesive remover. HUMP

I have the 3D version and I love it! I have used it on a care getting ready for a photo shoot to make the paint pop, and I have used it as the last go around on an express detail, which I think is what this product is truly made for. Durability should not be the deciding factor when using this...

She was just insistent on those windows. HUMP

I do Richy, two sizes. I have pulled emblems before, just the best way in my opinion when the paint is really bad. These came off super easy as well, so I probably did him a favor. HUMP

I havent tried those, I use the MF Madness Cloud Busters and Megs glass cleaner concentrate. I am going to try some baby shampoo diluted in water to see if that does the trick. The owner called and asked if I could come by and check the front again. I told her before she left that I would, so Im...

About 3.5 hours total HUMP

After, never had an issue. I use the red 3M tape to apply it and it works great. HUMP

I just posted an E30 that was single stage and I coated it with CQuartz Classic. It worked great, no streaks and great gloss enhancement. HUMP

Customer called to get this very large but completely tricked out GMC truck detailed. This is our introductory detail, it consist of deep cleaning the exterior, and protecting the paint and also a light interior detail, vac and wipe with small areas taken care of. This is a great detail for a...

This one came to us after the front end had been re-painted. The owner wanted the original paint to match the new paint as much as possible. The original was single stage and had oxidized over time. He was able to come by the shop for an evaluation and a test spot,so I knew my plan of attack...

I have never applied Klasse AIO with a machine. I usually apply it by hand to areas that I am not putting a machine. Door jambs, interior areas, under the hood, under the trunk. I use the Lake Country red applicator. HUMP

Are ceramic coatings actually good? (YES) I have a 2015 gti i was thinking about getting it for. Do they last a long time? (2+ years if maintained) protect against chips? (No) thanks See, that was easy. HUMP

M100, M101 and M205 HUMP

If it is getting hot, run it up to 6 and let is free spin for a little while. I know that the PE-14 is set to pull in more air that way. We were told this at a meeting with the Flex Rep. I have a FLEX and the Rupes 15. I like both. I still need to buy some hybrid pads for the FLEX, because I...

It is the heat and humidity. You are using a product designed for the UK, thus the name, and for colder temps. It is designed to flash off fast, so in high heat, it's doing it very fast. The slight halos or light tracers that you are seeing usually cure out in my experience as the carriers...

Because UK was meant for colder temps, it is better to use Classic in the hotter months. That being said, you can use UK, it will just be a wipe on wipe off scenario. As others have stated, work a small section to get the idea of how its going to work. I usually start with a mirror. HUMP

I recently started using that one and you are right, with different pad combos, it can handle a large amount. HUMP

CQuartz Classic. HUMP

What I always enjoy is the consistency of your work, staying with a system that always puts out great work. HUMP