Search results

Amazon has the Gilmore, but I did get one from Autogeek (few dollars more) and after two uses had issues. Not a bid deal, but had a few and then pulled the trigger and got a foam cannon. Looking around sites they were about 100+ and all were made by MTM. A electric pressure washer is almost a...

I did on the Merc but not the Mustang. (Same effect, on both, but maybe the oils in the previous apps would explain it but....)---The Malibu I actually used it directly after claying and washing the vehicle to give the customer a before correction choice. So that doesn't help. I just...

I have used the Mig. Frutta and liked it well enough to try another product from their line. I was needing to grab another bottle of WOWa sealant so thought I would try that one. Not again for sure.

I typically use the Zaino Z-CS WOWA product and like it a lot for a sealant and trim coating. I thought I would try the Migliore Cima sealant. Have tried it on three different cars now and it still appears to streak, smudge, and leave residue. The cars have been a 2007 Mercedes E class with...

Here is what I have found---- I used the LC CCS pads with the PC with the WG duo. Worked nice but changed things up a bit and am much happier with this combination-- 1. Meguires microfiber buffing pads 2. Meguires D300, which finishes really nice 3. Menzerna SF4500, SF4000 could be used also but...

I have hard paint also on a Merc. I found the TSR worked pretty well with the yellow pad, however with the white, which I started with, did not correct enough. I switched to Meguires D300, for the top layer of the car and the white pads leveled it perfect. Just giving you a good suggestion if...

See if a mobile tint guy can strip the old off and then put new on, while you have the car. If you arrange it, that will impress your customer, while saving him time. First though, ask the tint guy what he suggests.

I greatly appreciate all the answers here. I really prefer the matte, like new look, of plastics including the wheel wells. I hate cleaning all the gunk from them after spraying with a dressing. I think I will try the 303 or 1z, which in many threads seems to be quite popular. Wipe on with a...

Thanks, I appreciate the info. I might try a old bottle of the Zaino CS sealant that I have laying around. See how that works on one wheel well and go from there.

Great choice on the Flex. Ordered the PC and had the same issues as you. Also when doing areas like the top of bumpers, where only half the pad was being used, I found that only no pressure at all was the only way to get the pad rotating. I am sure a dedicated 3" Griots would work great for this...

Hopefully you guys can help me out??? I can't seem to find products who list their spray dressings as water based. I cannot use a spray for wheel wells and underbody if silicone based due to driveway marring. I feel like an idiot out in the street spraying someone's car. I usually clean the...

Definitely Flex-3401--much better than PC 7424 for cutting LC CCS Pads (better cutting the Meg microfiber cutting pad) Yellow, or Orange Pending cut needed with Meguires D300 White, with Menzerna SF4500 Red, with Menzerna PO115 Glaze w/ no finishing abrasives (not really needed but do on my car)...

1.This quote explained it all. I was slightly confused when reading your lists. I think great effort and thought went into making them and I congratulate you for that. 2. I think for the polishing, you should use words like "Paint Correction" and then you can actually show the customer what you...

Just pulled it out of the Garage, Full Paint Correction 53hrs

Taken a month ago. White Sands National Park. Zaino Products were used. Changed since will update.

Hit me up, I would be glad to try and help you and give some pointers. I will likely be in CLT next weekend for a week or so.

Welcome, I am from CLT and Pawleys ISland SC also. Worked with CMPD Eastway Division last night. You guys were pretty busy with the rain.

White Sands National Park