Search results

I prime the pad like I would any polish to start with, then four dime sized there after. Wipe off with a Gold Plush Jr. Four passes in about a 2x2 section. I used this product the same as any AIO I would use.

So I decided to get some HD Speed and give it a try per all the internet hype. Applying with a LC white pad to a door panel on a 2007 CRV. Everything went as I've read, long work time and little to no dusting. Finish the door panel and begin to remove it. This stuff was a pain in the but to get...

I've been using BF SIO2 since the beginning of May. Unlike Reload never had an issue with streaking. Just like others can't get it to streak. Spray the microfiber then a spray or two on the panel and wipe away. Flip the microfiber and go over again. Longest I've had it on is about a month and...

Re: NEW FLEX Cordless Polishers! I have one of the Flex cordless polishers. So far used to apply AIO's and sealants. Pretty much have to run it on speed 6 or close to it or the weight of it will stop it from spinning. I bought it because I do a lot of work under the car port this time of year...

Is the DA's speed adjustable? Or is it like Griots battery operated with just one speed.

This VW GolfR

The only way to stop the dust is to replace the pads.I think ceramic pads are your best bet. I Opti-Coated my wheels to make cleaning easier.

I use ONR with water from my RODI filter. I have the filter plumbed into a 30 gallon Rubbermaid Brute trash can. I used this for make up water on my salt water reef tank that I used to have.I have a float switch that shuts the filter off when the container is full. I always have water ready to...

Well sometimes I fall for all the hype on these forums. I should no better, here's my list of over hype or products that disappoint... FK1000/FK425 Opti Seal Optimum GPS Souveran Paste Wax Duragloss 601/501/105

I have yet to find a product that hides major defects in the paint...good luck!

You can do what ever you want to it, no need to wait! De-contamenant- Iron-X Clay Polish- remove any dealer supplied swirls, skip if paint is factory perfect. Seal- with what ever wax or sealant you prefer.

Very nice!

845 was my go to. Fuzion has taken over that spot. Not sure if it's as durable but I don't really care as I love this product.

I like OID, when I'm washing with ONR I just spray it on when I'm drying. The worst for me was FK425, streaky and hard to remove if you spray it on the paint and miss any over spray. I saw so much hype on it, just didn't do anything for me.

ONR with OID Wolfgang Fuzion

Very nice detail,excellent reflection, the elastrofoam block is so much easier to clay with.

Thanks.... opie_7afe...yes it's a MT6. Marc08EX...the reason I didn't Opti-Coat the whole car is I like to wax and have a ton of products I would no longer need. So I just did sections that would benefit and I wouldn't miss not applying a LSP there.

I picked up my car Saturday, ordered it back in July. The first thing I did when I got home... Washed with ONR Clayed with Ultima Elastrofoam Zaino AIO in a few spots IPA wipe down The wheels...washed,Roll-Off and IronX pryer to coating Opti-Coated the wheels,door jams,mirrors,front end,rear...