Search results

Originally Posted by Thejoyofdriving Well.....Generally yes, but it really depends on what you use it on. I think anything over a PH of 12 is considered caustic. I stay far far away from acidic or caustic cleaners as they can damage some surfaces. Tom, How do you know they are caustic...

You are probably right but are you saying then that it is not truly possible to "layer" waxes and that what you are doing is really just building up total thickness? DAL

As others have said, glaze, seal then wax, but make sure you are using a compatible glaze.(i.e. no carnuba). The Wolfgang glaze is fine under the Wolfgang DGS. DAL

I would wait the full 24 hours or more. You see, it's about more than just the solvent evaporating. The wax even thouh 95% of the solvent is gone quickly, is still fairly soft. If you quickly re-apply another coat of wax, what happens is that the solvents in the second coat dissolve some or all...

The gas phase will rise in proportion to the density difference between the vaporized solvent and the surrounding air. In an absolutely quiet environment, yes, the rate of vapor rise will be a very small factor. Whether allowing the material to haze or not, the wipe off removes the vast majority...

It's not linear. Dalton's law of partial pressures is a little more complicated that the explanation below, but essentially, solvents evaporate in proportion to the concentation difference between the liquid phase (on the car) and the concentration in the air (which is normally zero, except in a...

XMT finishing glaze has carnuba. It won't work well under a sealant. (Ask me how I know) I would polish to the point of LSP ready, do the sealant, the wax and then the Spray Souveran. As far as I can verify (from first hand knowlede because I have the products and read the label), the Wolfgang...

If the glaze contains carnuba, like XMT finishing glaze, then the sealant won't bond. Some other glazes like Wolfgang Finishing Glaze is designed to be the last step before the WGDG Sealant. DAL

Only problem is that it won't be big enough!!! I've got 10 of the 29 qt size drawers on shelves in my garage and looking for more room even now.

I polished them out as I did the car, and didin't really notice any particular yellowing, but then I usually do the HL when I do the cars anyway. Just part of my system.

Be very Careful!!!!!!!!!!!!!!!! The door handles are plastic, so I taped them off completely to void any potential damage. Once I took the tape off, I polished them by hand. Te A Pillars should be not problem with the PC.

Does browsing the Autogeek Store site together count as "Shopping"?

I want One I would like one!

Can't have this fall off the first page yet bump

Thanks Thanks man... it should gt better. Another coat of WDGS and then a coat or two of Souveran should improve it a little! Don

Road Rash Right below and to the right of the DS headlight there are some significant love bug etchings and a few rock chips. The very bottom has a small amount of curbage. We may or may not try to fix the curbage, but will likely fix the rash on the bumper cover face in the future. He was...

Good Question I guess a better way to have said it was that I started with the least aggressive approach I thought would work. You're right though, I could have started with #2, or #1, but my previous experience with those products on my other black car led me to believe that #3 was the place...

OMG... It Rained! Yep, on his way to work today, it rained. You would have thought he had been rear-ended. He'll take care of it, it is something he has waited and worked for for quite a while. This job is his first that pays real money so he was able to save rather than just maintain his...

Used a Rotary On this car, it would have been very difficult to impossible to achieve the results I was looking for. I used a rotary machine. Don

He's had to suffer through hand me down cars since he started driving, first was an '85 BMW325 that he had to rebuild before he could drive it, then when that engine blew, I bought him the Mazda MX6, which he has driven for about 3 1/2 years. Early on he had to rebuild the front end after an...