Search results

I'm about to order my first bottle of ONR and Optimum Spray wax. But I was wondering if its ok to use the spray wax right after the ONR when I recently (about last week) coated my car with Pinnacle Liquid Souveran wax. Will the spray wax work well with the current coat of wax?

So yesterday I completed my second detail on my white Honda prelude. I washed, clayed, m205, Mazerna glaze then topped it off with Pinnacle Sovereign Liquid Wax. So I have a few questions... If I wanted to put on more glaze by hand, if effective, would it be effective since its layered with wax...

I usually wipe the lens clean with a cloth without using any cleaner or I just spray simple green. Is using mineral spirits as a cleaner in the begininning before sanding a good way to clean it, hmm.. maybe that could be the culprit, I'll give it another try again sometime this week to see...

So far yes, I've done 3 seperate sets of headlights and all of them had tiny little bubbles.

I just purchased an additional spar and minerals today at my local home depot. I redone my procedure on a new headlight , but I noticed that after I finished my wet sanding, I cleaned the headlight with some mineral spirits and as I looked at it, I noticed tiny small bubbles all over the...

I just purchased an additional spar and minerals today at my local home depot. I redone my procedure on a new headlight , but I noticed that after I finished my wet sanding, I cleaned the headlight with some mineral spirits and as I looked at it, I noticed tiny small bubbles all over the...

I just picked up a pair of mercedes headlights for a pretty low price and I'm planning on restoring it to new condition. The reason it was a low price was because someone used an exact o-knife and ran it down the headlights. If you run your finger over the scratches, the scratches are sort of...

If I keep the contents in its original containers, its a bit hard to pour out even amounts of spar/minerals out of the original containers. Especially the mineral spirits as it doesn't want to pour in one direction.

I don't think moisture if a problem, the spar is still in its original can but sealed tight and saran wrapped. The mineral spirits are also in its original can, both are in my house all the time. But if I do get new cans of spirits and spar , then what do you suggest to put them in?

Here's my process ... First I sand with 800,1000,1500,2000, all wet sanded in horizontal sanding. After I'm done with sanding, I hit the lenses with mineral spirits to wipe clean the areas and then with 91% isopropyl alcohol then buff dry with a clean microfiber. I then get out my small plastic...

I'll give it another try tonight and see how it goes, I'm not sure what I did wrong. I seem to done everything correctly.

I actually did shake the bottle with the 60/40 mixture inside, thought it was the problem that caused the small bubbles appearing on the lens when I applied it. So I then mixed 50/50 into a small plastic cup and stirred gently with a toothpick. I soaked the scotts towel into the mixture, let it...

Are you guys still using the 50/50 mixture ?

When applying the mix with a scotts towel, your only suppose to slide it side by side from the top down if im correct?

I used a blue scott towel folded into 1x 1inch. I mixed the spar/spirits into a 6oz plastic bottle and I used the squirt cap to squirt the sealant onto the towel, then I slowly applied in onto the lenses horizontally.

I just done my first headlight with a 60/40 mixture, urethane/spirits. But when I finished putting on the coating onto the lenses, little small bubbles/dots started to appear. Anyone have any suggestions on what I did wrong?