Search results

What do I sand the clear with 2000? Sanding won't dull it at all? Or should I just polish it?

Thanks, yep it wasn't the actual base, it was duplicolor, which comes out flat. I think the problem was the clear was too far away so it was basically just spraying dust/over spray. I putting the can 4-5 inches away this time (instead of the recommedned 8-10), and it seems to be making it...

Oops, are you suppose to spray clear over the base and then sand the clear?

Thanks for the tips! 1) you didnt remove the hood and bumper prior to painting >>True, I'm sure how much difference that would have made though 2) if you wetsanded before painting i'm guessing you didnt use anything more aggressive than 1500 grit, should've used at least 800 to give the...

It was about 8-10 inches, as the can stated, should I hold it closer?

Hehe, I like matte, the rest of the car is gloss though. I wet sanded before the gloss, so its pretty smooth.

I guess my question is rather, is there any way to get this glossier? 6 coats of dupli-color black, sanded with 2000 grit 6 coats of dupli-color gloss Here's a before and after photo:

What did I do wrong here? The paint is flat even after I applied duplicolor clear coat:

What's the best way to clear coat on a budget? (meaning I don't have an air sprayer and other fancy equipment)

Thanks for those tips! Just to confirm, is that before or after I clear coat?

Hey Mike, I'm working on a 2005 Hyundai Tiburon, touching up some areas that have been bondo'd. I used rattle spray dupli-color.

Thanks! Didn't know that. Is it worth polishing after the clearcoat? Or typically no?

I'm a total newbie to this, although I've been doing some research. I just touched up the better half of my hood, all of the spoiler, plus a few other areas, (spray paint over primer over bondo). I used black spray paint and then original paint was black as well. The new paint is rough to the...