Search results

Thanks. Hope it helps.

Good advice there - thanks :dblthumb2:. This was 2008 trim, and some of the first testing I did was with various grades of 3M XF paper/sponges. I would definitely not suggest using any machine sanding process (unless one is an expert) as I think one could easily sand too deep. The soft...

Thanks - It was 2 sanding steps (first 150 and then 220 grit) followed by 2 compound steps. This was my first ever attempt at this and I was also surprised at how workable the material is. It took a while to figure out the correct steps using a test area, but once I had the correct process...

Thanks everyone. I think it would need to be a hard paste product at least, else it will be spraying all over the place :eek: I did actually try a couple of paint compounds with a 3 inch GG orbital initially (following the least aggressive first - approach) but that was of no use at all given...

The stainless steel door sills on the Cayenne were in pretty bad shape, so I started looking for options to bring them back into respectable condition. This is what they all looked like before I started: So after some research and a little trial and error as well this is what I did: Step...