Search results

I know that this thread is old but i do have a question. i plan on doing my regular "pre-detail" wash (dawn and some tar/grime remover), then i will use 1119 in a bucket with a microfiber towel. after that i am wondering if i can use sirr similar to iron x? by that i mean can i apply it to the...

nice

any update on this stain? im curious to know

i am looking to get this but it is on back order: FLEX XC3401 Changeable Backing Plate System does anyone have one in good condition that they would be willing to trade for anything? let me know if you do and i will let you know what i can trade.

could you pm me the link to the 4" backing plate?

jeep paints are hard and subaru paint is soft, so you will need a bit of variety when it comes to your compounds and polishes, i used optimum compound 2 and polish 2 on my jeep, great results. farecla fast track universal compound and g10 swirl remover (its a fine polish) also worked very well...

like i said if it is firearms related, its clp or oil and carbon/powder residue, get a gallon of zep citrus to start, spray it, then lightly brush with a soft bristle brush, then extract...then repeat. if it is coming off on your bare hand then it will clean up no problem, it may just take a...

until i read through this thread i thought that the rupes were a forced rotation da...i can see where thaey would be useful for large flat areas, but i prefer less of an orbital stroke for tight curves (my jeep has a lot of them) ill stick to my pc and my flex, i have a harbor junk rotary, (i...

go on youtube and wach all of junkmans videos, the channel name is junkman2000, i would say set aside a weekend here or there and do the vehicle bit by bit, (do the hood one weekend, fenders the next, etc...) each section you do you should do completely: wash, clay, polish, seal...as far as...

thats not powder then its probably a a mixture of clp and powder residue, (a lot of guys will do a quick field lube on the rifle using clp before leaving the range, it works to break up the residue as it sits on there and when you get home it makes cleaning a hell of a lot easier, but a lot of...

i just tested mine out (after reading through the manual and lubing the felt ring) on the lid to my tool box, i wasn't looking for insane results, just getting a feel for the tool. i used an orange compounding pad from harbor freight (6.5") and some UC and after a few passes the top of the box...

great job on the truck man, good to see that you took the initiative to learn and are caring for your vehicle the right way

speak to the vehicle's owner first and figure out what it is or at least rule some things out...then you can come up with a better plan of attack.

I would say 14 ga at a minimum but i would use 12 to be safe it should say in your 7424 owner manual

the brass fittings in a foam gun are not rated for high pressure (i wouldnt go past 120psi) where as the fittings in a foam cannon are rated for very high pressure (upwards of 2000 psi) but hey if you have the skill to pick chunks of brass out of yourself, by all means don't let us stop you.

ugh i just can't wait to try mine out, i compounded the hood and fenders on my dad's 2002 f-350 with the 7424xp and although they came out decent (using ultimate compound) i want to see how they will look with some farecla fast track or g10 on a polishing pad with the flex.

shampoo and elbow grease, IMo any tire dressing that remains on after that is bonded well enough and clean enough to stay on be ok. just make sure you are using a good dressing such as optimum tire gel

use car wash shampoo and water to maintain your wheels and tires, you will eventually need to reclean the tires with a tire cleaner or degreaser but the wheels can be maintained just fine with your routine car wash shampoo

thanks, and you still use it as you would any other QD or do you spread it and wait before removing all of the qd?

i think it was klasseact who posted it but i remember seeing a while ago someone said that they add KSG to a QD in order to add some protection to the paint (almost the same idea of using polycharger) ive been thinking about mixing up ONR as a qd and adding some KSG to the mix, or possibly...