Search results

I've applied Cquartz UK to the hood of my black VW and I've wiped it down numerous times with eraser, checked the paint in full sun, then applied. I used the suede applicator and only did a small 2x2 section at a time. It's about 75 degrees and ~30 humidity i would guess. When I pull it back out...

I haven't seen much on these products as far as reviews. Just wondering if anybody has experience with these products and if so, do they have a lot of polishing oils in them? Thanks

After applying the paint coating about 24 hours ago, I know it is ok to get the surface wet but what about using ONR? I've read somewhere that someone used ONR over a coating and had some pretty dismal results. So I'm just wondering, can I use ONR safely over my 24 hour old DP paint coating?

I've read the Poor Beading From DP paint coating thread and it was stated that a member applied 2 coats 24 hours apart. If the paint is prepped properly with the DP coating Prep Polish and the coating is applied, left for 24-48 hours in the elements (water and pollen), not washed or touched at...

We all know that working with black paint, whether soft or hard CC, is the most patience testing, scrutinizing, pain staking process. I've done many black cars from full correction to an AIO. I've noticed that, say I have a gloss non metallic black Toyota Rav 4, if I use a rather light combo...

Can CarPro PERL be used successfully on clear plastics such as plastic headlight lenses and reflectors without hindering any reflective abilities of said lenses?

Will DP prep polish remove few week old Collinite 845 by itself? Reason why I ask is that I am preparing to coat my vehicle with DP Coating and the car has been previously corrected and then topped with Collinite 845 along with a few UWW's and UQD's on the side over the course of the month or...

If I use Uber compound and am satisfied with the results, enough to apply my LSP, WDGPS, would I need some sort of wipe down/eraser after the Uber compound? I figure that since they are synergistic, the oils in uber would not interfere with the bonding of DGPS. Then again, I know that most...

I've done a ton of searching and reading about collinite 845 on many different forums as, well, there's so many of them. I've used it a hand full of times on my dark blue Jetta and I always apply it thin. This enough to where, in regular garage lighting, I can barely see if it's on or not...

I've been using m205 for quite a while on all different paints. My personal vehicle is a 2013 Jetta in a dark metallic blue. I have about 95% correction as of now. There's a few RIDS and chips but I can deal with that. It's when I was cleaning up from this brutal northeast winter, all of the...

This may sound stupid and noobish but I've had a recurring issue that I've seemed to remedy: When I've used m205 on a white CCS pad as more of a one step clean up, I would prime, then add 4 dime sized drops and do about a 3x3 section. Working the product 5-6 passes each way, I would go to wipe...

Is Kaio followed by opti seal a usable combo? I know KAIO is a chemical cleaner/non abrasive/ acrylic base but would opti seal bond to it? Or does opti deal only bond to bare paint? And wolfgang liquid seal, same questions?

I know I just posted a thread similar to this but now I have a new questions after searching If I use Klasse AIO to "clean" the paint, will WGDGPS adhere well? I know AIO is a paint cleaner but also is a sealant. I also know WGDGPS is best applied to bare paint. Will WGDGPS adhere well to...

I'm rather new to posting but have been learning quite a bit. I have WGDGPS 3.0 and also a diluted KHGSG mix that I use as a Qd. I also use Colli845 from time to time. I really haven't gotten into chemical paint cleaners aside from my sample of WGPPE. After using my ksg mixture Qd a bunch...