alban61
Active member
- Aug 20, 2006
- 1,584
- 0
Decided to try out my recently acquired Menzerna SIP, Finishing Glaze, and OP.
This is my son's 1995 Hyundai Accent with over 120K miles on it. Hasn't been washed for almost a year!! There was bird poop, road tar, scratches (some were deep and I don't wetsand), dings and dents!
This is my son's 1995 Hyundai Accent with over 120K miles on it. Hasn't been washed for almost a year!! There was bird poop, road tar, scratches (some were deep and I don't wetsand), dings and dents!
Wash
DP 4-in-1 Rinseless Wash with White/Yellow Shmitt, and Black Wheel Shmitt.
The Black Shmitt helped remove most of the tough crap.
Clay
Mother's Clay with DP 4-in-1 for lube
Wheels/Tires
Amazing Roll-Off for wheel wells and tires. (Thanks Sparkie). Brown crap was flowing!!
Wheels were hubcaps that were scraped and scratched. Couldn't do anything but just clean them.
Trim
DG #321 Non-Silicone Tire Dressing. Side-mirror housings were tore up, peeling and gouged! They were discolored and looked grey with a beige/tan tint. Got them back to darker grey but not black.
Polish
Used my new toys. Menzerna SIP with a touch of OP (thanks Al-53) with PC, on Orange 4" CCS pad. Finished LSP ready. Temp was 81 with 35% humidity. I was working in half sun/half shade. I was surprised with the SIP/OP combo. Very little dusting!! Much, much less than XMT 3. Big Al's tip about adding a pea-sized drop of OP helped! Car was badly swirled. I suck at taking pics, so only 1 pic really showed it. I'd say 85-90% of swirls were removed.
LSP
First applied Menzerna Finishing Glaze on Grey 4" CCS pad. Love the shine and wetness it gave the paint. I found it a little difficult to remove. I worked each panel before removing. Working outdoors was probably the culprit! XMT Carnauba Finishing Glaze was easy to remove, having used it before. However, the Menzerna Glaze did not absorb into the pad, the way XMT did.
Topped it all with PB Natty's Wax by hand. Used Red CCS applicator pad. Went on easy and came of easy. Worked each panel using WOWO method.
DP 4-in-1 Rinseless Wash with White/Yellow Shmitt, and Black Wheel Shmitt.
The Black Shmitt helped remove most of the tough crap.
Clay
Mother's Clay with DP 4-in-1 for lube
Wheels/Tires
Amazing Roll-Off for wheel wells and tires. (Thanks Sparkie). Brown crap was flowing!!
Wheels were hubcaps that were scraped and scratched. Couldn't do anything but just clean them.
Trim
DG #321 Non-Silicone Tire Dressing. Side-mirror housings were tore up, peeling and gouged! They were discolored and looked grey with a beige/tan tint. Got them back to darker grey but not black.
Polish
Used my new toys. Menzerna SIP with a touch of OP (thanks Al-53) with PC, on Orange 4" CCS pad. Finished LSP ready. Temp was 81 with 35% humidity. I was working in half sun/half shade. I was surprised with the SIP/OP combo. Very little dusting!! Much, much less than XMT 3. Big Al's tip about adding a pea-sized drop of OP helped! Car was badly swirled. I suck at taking pics, so only 1 pic really showed it. I'd say 85-90% of swirls were removed.
LSP
First applied Menzerna Finishing Glaze on Grey 4" CCS pad. Love the shine and wetness it gave the paint. I found it a little difficult to remove. I worked each panel before removing. Working outdoors was probably the culprit! XMT Carnauba Finishing Glaze was easy to remove, having used it before. However, the Menzerna Glaze did not absorb into the pad, the way XMT did.
Topped it all with PB Natty's Wax by hand. Used Red CCS applicator pad. Went on easy and came of easy. Worked each panel using WOWO method.
I began at 10:30am and finished at 4pm. I'm aching now! The car looks alot better than it did. After putting my stuff away, I remembered that I didn't touch the headlights!! Oh well! I just vacuumed and wiped down the interior. It's alot cleaner than what it was, but not detailed. Therefore, no interior pics. Also used DG #371 Absorb-It Odor Eliminator. It gave a nice clean scent. Nothing overpowering or flowery. Almost like after a rain with a hint of fabric softener. 
I'm happy with my Menzerna products, Optimum Polish and my 4" CCS pads for my PC. Sorry such a long post. Here are some pics.
BEFORE
Swirls
After Menzerna SIP

I'm happy with my Menzerna products, Optimum Polish and my 4" CCS pads for my PC. Sorry such a long post. Here are some pics.
BEFORE




Swirls

After Menzerna SIP

Last edited: