02blackout
New member
- Jan 31, 2009
- 203
- 0
This 2000 Porsche Carrera 4 in Guards Red was in for a full correction. This 911 was in pretty bad condition, from heavily swirled paint to severely baked on brake dust/contaminants.
______________________________________
Didn't get a full before pic of the car, so here's an after pic just to show you what I'm working with:
LSP of choice: SV Insignis
Applying Sonax in a Kwazar bottle. This bottle is a must-have:
Agitating Sonax with a SV wheel brush
Did a comparison of Sonax vs Straight CG Grime Reaper:
Mixing my special potion for the foam gun. 1oz CG Maxi Suds, 2oz CG CWG, 2oz Megs Green APC. This is perfect for plenty of foam and to strip prior LSPs:
The result:
Before sun pics:
Taping:
M105 on a Uber Yellow pad via Flex 3401:
Menz Power Finish on a Uber Green Pad via Flex 3401:
Menz 85rd on a Uber Green Pad via Flex 3401:
50/50s. I need to work on how to get better pics of swirls with my came, I tried:
Corrected:
Wax of choice: SV Insignis. I normally would put Power Lock on before Insignis, but I didn't have the time to let it cure. Moreover, this is a perfect way to test the durability of Insignis with proper maintenance washes (by me):
_________________INSIGNIS BEAD ACTION :applause2:_________________
CG Bare Bones in Ducts
3 Coats of 303
I originally had 90 pics in the writeup posted on a forum that would accept that many pics. But since AG only accepts 30 I'll dumb-down this down a bit, so much for being detailed about write ups.
Same instance with an F430 detail writeup I had, except it had 250 pics with a model photoshoot. Oh well.
______________________________________
Didn't get a full before pic of the car, so here's an after pic just to show you what I'm working with:
LSP of choice: SV Insignis
Applying Sonax in a Kwazar bottle. This bottle is a must-have:
Agitating Sonax with a SV wheel brush
Did a comparison of Sonax vs Straight CG Grime Reaper:
Mixing my special potion for the foam gun. 1oz CG Maxi Suds, 2oz CG CWG, 2oz Megs Green APC. This is perfect for plenty of foam and to strip prior LSPs:
The result:
Before sun pics:
Taping:
M105 on a Uber Yellow pad via Flex 3401:
Menz Power Finish on a Uber Green Pad via Flex 3401:
Menz 85rd on a Uber Green Pad via Flex 3401:
50/50s. I need to work on how to get better pics of swirls with my came, I tried:
Corrected:
Wax of choice: SV Insignis. I normally would put Power Lock on before Insignis, but I didn't have the time to let it cure. Moreover, this is a perfect way to test the durability of Insignis with proper maintenance washes (by me):
_________________INSIGNIS BEAD ACTION :applause2:_________________
CG Bare Bones in Ducts
3 Coats of 303
I originally had 90 pics in the writeup posted on a forum that would accept that many pics. But since AG only accepts 30 I'll dumb-down this down a bit, so much for being detailed about write ups.
Same instance with an F430 detail writeup I had, except it had 250 pics with a model photoshoot. Oh well.
Last edited:
