VW 91
New member
- Sep 2, 2010
- 211
- 0
Detailed a red pontiac GTO. Car was relatively clean, aside from the heavy swirl marks all over the car. My process for the car was:
Two bucket wash method with Meguiars Shampoo Plus and cobra microfiber chenile wash mitt
Wheels cleaned with P21S gel wheel cleaner
Pinnacle ultra poly clay with ONR clay lube
PC7424XP
1 pass with 105 with yellow CCS pad
1 pass with 205 with orange CCS pad
LSP: Mothers California Gold Pure Carnauba Paste Wax
Windows cleaned with DP Krystal Vision Class Cleaner
Tires dressed with DP gloss tire gel
Exterior trim protected with Aerospace 303
Interior dressed with Aerospace 303 on upper trim
Lower trim dressed with Meguiars water based dressing.
Car before, like I said, it was in pretty good condition..
Until it was brought under the lights.. Some heavy swirling.
On the hood
Rear quarter
This picture really shows the swirling.
Got the car taped up and ready to start for paint correction.
Doing a test spot.
Before section:
After section:
Tape line down the middle to show the original condition of the paint:
Finished shot of part of the hood,
And one 50/50 of the driver's side fender:
And now the rest of the afters..
Rear quarter panel after, still some very small swirling, but over 90% were removed.
The rest are all interior after pics, sorry I wasn't able to take any before pics.
Comments and feedback are appreciated!
Two bucket wash method with Meguiars Shampoo Plus and cobra microfiber chenile wash mitt
Wheels cleaned with P21S gel wheel cleaner
Pinnacle ultra poly clay with ONR clay lube
PC7424XP
1 pass with 105 with yellow CCS pad
1 pass with 205 with orange CCS pad
LSP: Mothers California Gold Pure Carnauba Paste Wax
Windows cleaned with DP Krystal Vision Class Cleaner
Tires dressed with DP gloss tire gel
Exterior trim protected with Aerospace 303
Interior dressed with Aerospace 303 on upper trim
Lower trim dressed with Meguiars water based dressing.
Car before, like I said, it was in pretty good condition..



Until it was brought under the lights.. Some heavy swirling.
On the hood

Rear quarter

This picture really shows the swirling.

Got the car taped up and ready to start for paint correction.

Doing a test spot.
Before section:

After section:

Tape line down the middle to show the original condition of the paint:

Finished shot of part of the hood,

And one 50/50 of the driver's side fender:

And now the rest of the afters..



Rear quarter panel after, still some very small swirling, but over 90% were removed.








The rest are all interior after pics, sorry I wasn't able to take any before pics.





Comments and feedback are appreciated!