kdubski
New member
- Dec 8, 2010
- 195
- 0
AG Guru's I need some noobie advice! I detailed a 2007 ML350 this past weekend and I had a hard time with the wheels. The rotors/rotor guard is so large that I cannot fit my daytona speed brush under it. This goes as well for the Caliper because it's so large I probably can barely slide my finger between it and the wheel.
I have a second ML350 lined up for this weekend and it has the same wheels as the last one I did. Any advice on how to agitiate the brake dust in such a narrow wheel? Taking the wheels off is not an option at this clients house. Also, this is just a wash and wax service but normally i leave them spotless, not 2-3" into the wheel. Thanks guy!
I have a second ML350 lined up for this weekend and it has the same wheels as the last one I did. Any advice on how to agitiate the brake dust in such a narrow wheel? Taking the wheels off is not an option at this clients house. Also, this is just a wash and wax service but normally i leave them spotless, not 2-3" into the wheel. Thanks guy!