2012 bmw 550i m sport correction + 3 layers of Cquartz

jamores23

jamores23

New member
Joined
Dec 17, 2008
Messages
974
Reaction score
0
My customer contacted me after looking at my previous jobs. he is familiar with a few of my competitors nearby and he wasnt satisfied with there final finish and customer service. He wanted me to preform a 3 step correction and apply 3 layers of Cquartz . The car was brand new, and had some light imperfections with some deeper rids here and there. the wheels were also taken off, cleaned, polished, and sealed with cquartz. I dont have any before pictures, i dont know what happened to them on my camera. I spent 3 days working on this vehicle and I made sure to exceed my customers expectations. I also threw in a interior detail and cleaned up the engine bay/dressed it.

Products used:
dawn soap to help strip off previous wax.
micro fiber wash mitt.
2 bucket method
grit gaurds
daytona speed brush
other wheel brush
Iron X
pinnacle poly clay
LOTS OF MICROFIBERS!!! Threw out about 6 miracle towels
IPA
dewalt rotary
lake country flat pads (orange, white, black)
Cquartz
suede micro fiber towels (for application of Cquartz)
foam block for app. of Cquartz
Reload.
optimum protectant plus
vac
vx5000 steamer
popsicle sticks
tooth picks
grit guard pad washer
spur pad cleaner

Now for some pictures of the finish product.

IMG_1747.jpg

IMG_1736.jpg

IMG_1746.jpg

IMG_1745.jpg

IMG_1744.jpg

IMG_1743.jpg

IMG_1742.jpg

IMG_1741.jpg

IMG_1740.jpg

IMG_1738.jpg

IMG_1737.jpg

IMG_1735.jpg

IMG_1734.jpg

IMG_1733.jpg

IMG_1730.jpg


here is the review he left me. He is a elite yelp reviewer with many reviews. 5 Star Professional Detailing - Weston, FL
 
and here is some eye candy. this is my drag car i am not done building it yet.
403731_287622374626045_100001348546233_764700_1652982996_n.jpg
 
he was more than happy monito. read the review he left me.
 
jamores23 said:
and here is some eye candy. this is my drag car i am not done building it yet.
403731_287622374626045_100001348546233_764700_1652982996_n.jpg
Click to expand...
I was going to ask if that was yours. For the amount of money you have in that, you could have a wonderful, fast RWD car...
 
i did have rwd cars, i use to under estimate these cars alot. now im the one putting a spanking on rwd with a fwd :) takes alot more skill to drive it as well.
 
That is the most incredible and thorough review i have seen from a customer.
 
That customer review was really in depth. Obviously he was delighted with work you performed.
You really did a nice job on that BMW.
 
Nice job on the BMW and I read the customers whole review. He was so happy with your work man.

In response to your car - That is sick what you have going on under the hood there? Built B18? Is that a Full Race Manifold/Setup? Turbo size?

Why would he want RWD when he has a FWD car that would spank 99% of the cars around?

Sick Drag car man! You have yourself an awesome potential 9 second 160 mph car.
 
not full race, fabworx manifold he fabricates ALOT of manifolds for drag purposes full race hates him because his manifolds are basically exact replicas of theirs :) built b18 sleeved 62-65 precision billet wheel.
 
Nice job...and that's the only way to buy that car - with the M style package - changes the front end from docile to mean....
 
yeah he was a cool guy and he new what he wanted to get done . He has gone through quite a few detailers already and wasn't satisfied . He had high expectations and I put alot into it as I do with EVERY car that comes to me. I've been quite busy all I get are corrections and very few one steps.
 
Go to yelp.com and type in 5 star detailing and for location put weston fl

Sent from my SPH-D710 using Tapatalk
 
You must log in or register to reply here.
Back
Top