Here is a 2013 Tornado Red VW Jetta paint correction and Opti-Coat 2.0 application. This was my first go at using Opti-coat and application was pretty straight forward and easy. This car only had 3000 miles on it
Process
Rinseless wash with ONR and APC to strip any previous waxes or sealants applied by the dealer
Nanoskin fine grade clay
FG400 with Meguiar's MF pad after trying Optimum Hyper Polish, HD Polish, and Menz PF2500 just weren't giving enough cut)
Eraser Wipedown
Opti-Coat 2.0 Application
Quite a few scratches and RIDs
Usual scratches and swirls
And of course it wouldn't be complete without lazy dealership detailers putting wax everywhere
50/50 On the Driver's Side Passenger Door
Unpolished
Polished
After a cross-country roadtrip bug bombs on the headlight
Uncleaned
Cleaned
Pillars Before polishing
After
And done!
Feel free to post up any questions or tips!
Process
Rinseless wash with ONR and APC to strip any previous waxes or sealants applied by the dealer
Nanoskin fine grade clay
FG400 with Meguiar's MF pad after trying Optimum Hyper Polish, HD Polish, and Menz PF2500 just weren't giving enough cut)
Eraser Wipedown
Opti-Coat 2.0 Application
Quite a few scratches and RIDs
Usual scratches and swirls
50/50 On the Driver's Side Passenger Door
Unpolished
Uncleaned
Pillars Before polishing
