303 Salt Nuetralizing Wash Boost

[Klasse Act]

So I just received this yesterday and didn't realize the bottle was only 8 oz

So per the directions it's 1 oz to your 2BM wash bucket soap or as a RW it's 1 oz to 3-5 gallons of water, which is how I'll be trying it first. When the time comes I'll try it as RW first, then try it with Feynlab RW v3 as a "booster", probably. 5 oz to 1.5 oz of Feynlab RW V3 and go from there

Because of the small size & cost per oz, I'll be using this stuff sparingly, so has anyone used this before and if so...thoughts

Sent from my SM-G991U using Tapatalk

 

[Karl_in_Chicago]

I'm not clear on what is being "neutralized" with this product. Round here actual salt, NaCl, is what is used to salt the roads and absent any other ingredients I thought salt was already neutral (ph around 7). Has anyone measured the ph of the product? Just curious. No question that salt, left in place, can mess up most anything on a vehicle (true of lots of stuff, though) but IME the biggest impact is typically to the *uncoated* surfaces (esp those in undercarriage) and not the "shiny side" that most detail enthusiasts are already religiously washing/rinsing/polishing so, again, I'm not understanding what the added value is that this purportedly provides. "Protects against corrosion"? Well, sure, so do a million other products sold to us. "Breaks down salt"? How? I mean simple water dilutes salt so in theory I could add a few ounces of gin to my wash bucket and claim that G&T's "break down salt". I'd need to see more data as to how this improves/enhances the effectiveness of what anyone on this forum is already doing wrt detailing. Not trying to rain on anyone's parade but just skeptical by nature and doubly so on these kinds of products.

 

[Klasse Act]

I see this going in foam cannon at the Bays and foam underneath the EN for sure

If this product helps break down salt, well, combined with Bilt-Hamber Touchless, should make for a better pre-wash foam treatment in the winter, we'll see

Sent from my SM-G991U using Tapatalk

 

[MisterSnoop]

So I just received this yesterday and didn't realize the bottle was only 8 oz

So per the directions it's 1 oz to your 2BM wash bucket soap or as a RW it's 1 oz to 3-5 gallons of water, which is how I'll be trying it first. When the time comes I'll try it as RW first, then try it with Feynlab RW v3 as a "booster", probably. 5 oz to 1.5 oz of Feynlab RW V3 and go from there

Because of the small size & cost per oz, I'll be using this stuff sparingly, so has anyone used this before and if so...thoughts

yeah, $2 an ounce/use isn't very cheap.

 

[Big DaveBig Dave is verified member.]

I saw this when I was wandering around Repco yesterday, $25, they also had a salt neutralizing foam in the range. We don't have salt on the roads here, this is for 4WDs that drive on the beach.

 

[s_ribs]

Just received some but it hasn't been warm enough to try it yet. I'm going to try it as a pretreatment spray before the contact rinseless wash.

Hadn't heard of this one before so thanks for mentioning it!