Anything new from Flex? SEMA 2016...

Surely the XCE will be officially launched.

Would also be nice to see a smaller DA to run small pads.

I hope a 5" plate will be released for the XFE.
 
From what I've heard a new and improved Flex XFE will be launched!!! I've also heard from a source or two there is a chance for a new tool being added to the line up!
 
EWtheDETAILER said:
From what I've heard a new and improved Flex XFE will be launched!!! I've also heard from a source or two there is a chance for a new tool being added to the line up!
Click to expand...

Less than a year in production and a new & improved XFE?

New tool? Hopefully its another besides the XCE. Come on mini DA!!!!
 
EWtheDETAILER said:
From what I've heard a new and improved Flex XFE will be launched!!! I've also heard from a source or two there is a chance for a new tool being added to the line up!
Click to expand...

Yep it needed a redesign from the expensive, underpowered and unreliable product it was. Hopefully all those issues were addressed on the redesigned model. Hopefully the XCE3401 has no issues with the plastic shroud replacing the aluminum shroud from the VRG3401.

The excitement is building.
 
Guess nothing? =(

Not even the XCE3401 that was mentioned a year ago???
 
That sucks. Not even some MK III polishers from Rupes. Oh well


-Mr. Slick.
 
Slick01 said:
That sucks. Not even some MK III polishers from Rupes. Oh well


-Mr. Slick.
Click to expand...


Lol,you expecting polishers to be replaced yearly like cellphones? Besides the MKII's are ridiculously powerful so no change is needed there, on the Mini or Duetto or some other innovations yeah. As for Flex the silence has been deafening, maybe they realised the 3401 and PE-14 was where they hit their peak and anything since has been regression.
 
Pretty sure flex released a nice MF euro pad
Seen it on Renny Doyles live feed while using 3D 501

Flex could of came out with a 3401 or XCE mini..
This is what the people have been asking for

Sucks they just rehashed things, but atleast they improved the weak link in he XFE-15 and XCE forced non the less

As for Rupes mark 3...that'd be ridiculous lol
Now if they updated the Duetto/mini to that status cool.. but from my one thread I already knew that wasn't going to happen.. as with an updated cyclone..

As for maybe a Rupes rotary or forced DA..
Cool
As for a Mini or duetto sized Unit Ibrid

Sweet but can only dream ha
 
Pulled this from Detailed Image

[h=1]FLEX XFE7-15 (SEMA 2016)[/h] Last year we were excited to have a first look at the FLEX XFE7-15. This year FLEX had these units in action and an updated release date, late December of this year! FLEX has always been known for their forced rotation 3401 VRG, but the XFE7-15 is a free spinning polisher that features a 15mm throw. This new unit has an orbit rate of 3200-9600 opm (no load), a power output of 420 watts, a cable length of 13 ft, and weighs 5 lbs. All in all, it looks like an awesome option if you are looking for a large throw unit that is backed with the quality we all expect from FLEX! You can pre-order your XFE7-15 by clicking here, and you can check out some awesome shots we snapped from the FLEX booth below:


IMG_3792-1024x768.jpg


IMG_3802-1-1024x768.jpg

IMG_3794-1024x768.jpg

IMG_3795-1024x768.jpg

IMG_3796-1024x768.jpg

IMG_3798-e1478091743574-768x1024.jpg

IMG_3805-e1478091712375-768x1024.jpg

IMG_3800-e1478091721495-768x1024.jpg

IMG_3799-e1478091732904-768x1024.jpg
 
I'm assuming it will turn 5" pads, anyone know for sure?
 
would love to try out the flex xfe7, if it's as tough as the flex 3401 then we got a winner!
 
Now i'm confused... Didn't they already release the XFE7-15 a while ago? And wasn't it already having problems?
 
Yeah they rereleased it
That was most likely the reason the XCE never seen daylight till yesterday
It also comes with a 5in backing plate now
I remember demoing both of these back in March...
 
You must log in or register to reply here.
Back
Top