Best cleaner for white walls/letter

B

blagunas6

New member
Joined
Jul 30, 2015
Messages
30
Reaction score
0
Hey everyone, this is my first time posting on the forum. Well the question I have is what do you guys use to clean white letters or white walls on tires. I have been using megs super degreaser but I can't seem to get them as white as I want them too like when I first got the tires. Is this even possible to achieve? I have been thinking on buying one of those white tire marking pens to just touch up the lettering but don't know if it will smear or just make it worse. Thanks in advance
 
I second Bleche White (now owned by Black Magic) and a brass brush. After the tire dries, hit it with your favorite dressing/sealant. I still haven't found it's equal.
 
Thanks guys I will give that a try. I've seen that product before at like Walmart but never knew if it was good or not.
 
Bleche-White is definitely the best. However, I found that the new version since being taken over by Black Magic is not as good as the older.
 
Pats300zx said:
Bleche-White is definitely the best. However, I found that the new version since being taken over by Black Magic is not as good as the older.
Click to expand...

I noticed that it doesn't seem as harsh (once spilled part of a gallon jug on my hand, not good), but it still seems to work very well for me. Scrubbing with anything less than a brass brush always required a l LOT of elbow grease. That seems to be the key for me.

Someone also recommended I try Amazing Roll Off on raised white letters. After seeing what it does for engine compartments, I'm definitely going to try it.
 
I used Bleche White at my dad's car lot back in the 90's-2000's. Lots of Cadillacs and Lincolns with white walls. I remember it working really well with brass brush or stiff tire brush. I recently used Meguiar's D143 and a blue 3M scotchbrite pad (non abrasive) on white walls and had great results. I think a strong dilution of APC and the appropriate brush should work. I really like the scotchbrite pad, it allowed me to scrub hard on the more stained areas of the white walls.
 
I'm not going to say what IS the
best cleaner for WWs/RWLs/RWOLs...

But:

If the requirement is to get
them surgically clean/white...
I'll use a bona fide rubber cleaner,
such as: XTRA SEAL 14-100;
TECH RUB-O-MATIC.

Otherwise:
I'll apply a poultice made from a
finely powdered cleanser, such as:
Bar Keeper's Friend, Bon Ami,
Comet; Ajax; etc.

Also, IMO:
TuF-Shine's Tire Cleaner is also
very capable at "whitening".


Bob
 
blagunas6 said:
Hey everyone, this is my first time posting on the forum. Well the question I have is what do you guys use to clean white letters or white walls on tires. I have been using megs super degreaser but I can't seem to get them as white as I want them too like when I first got the tires. Is this even possible to achieve? I have been thinking on buying one of those white tire marking pens to just touch up the lettering but don't know if it will smear or just make it worse. Thanks in advance
Click to expand...
Use a pumice stone and whatever cleaner.
 
GSKR said:
Use a pumice stone and whatever cleaner.
Click to expand...
I took your advice GSKR n it worked fast n quick . I was at the store looking at the black magic bleche wite but after reading the label it just sounded more like a degreaser. So I went and bought the pumice stone which was only like $1 and tried it out and these were the results. First pic the first B was cleaned the second B wasn't. Second pic The lettering grabber was fully cleaned the at2 wasn't.
View attachment 52602View attachment 52603
 
LEDetailing said:
I used Bleche White at my dad's car lot back in the 90's-2000's. Lots of Cadillacs and Lincolns with white walls. I remember it working really well with brass brush or stiff tire brush. I recently used Meguiar's D143 and a blue 3M scotchbrite pad (non abrasive) on white walls and had great results. I think a strong dilution of APC and the appropriate brush should work. I really like the scotchbrite pad, it allowed me to scrub hard on the more stained areas of the white walls.
Click to expand...
One swipe around whitewall with lacquer thinner no cleaner can compare and less labor.
 
GSKR said:
One swipe around whitewall with lacquer thinner no cleaner can compare and less labor.
Click to expand...
lacquer thinner can't not be used with white lettering.It has to be a continuous whitewall like on classic cars and keep off the black part of the tire.If not you will drag black onto the clean white wall and it will be a pita.use terry cloths and use your index finger to stay on track with whitewall and throw away the terry cloths after.
 
You must log in or register to reply here.
Back
Top