Confused about pressure washer fittings !!!

I downloaded the instruction manual and if you go to page 7.
Look at the trigger portion of the handle. It has a tube that comes out and screws onto the other portion that has the quick release nozzle end.

Once you get it measure the internal diameter of the handle end. If it is a standard size (I will go out to my garage tomorrow and measure mine) you will be able to buy adapters and quick release fitting to attach anything you want.

I bought a Snap On washer at Costco and they used a specific to them size (to insure that you can only use their accs.), so I chucked an adapter up in a lathe and turned the ID larger so now I can use any accs. on it.
 
Thanks old let me know.
 
According to Bill @ Pressurewashersdirect the Cleanforce has 1/4" fittings which should work w/ MTM hydro or GFoam foamers. I bought the AR 142 pressure washer on sale at HD but it has "unique" fittings and evidently no adapters are available.
 
Once you get the pressure washer just take the wand in to your local hardware store to find the right fittings. The Ace Hardware I used to manage had an entire wall of quick-connects and fittings. I'm sure you will be able to find something that will work.
 
Just measured the fitting. The ID of a standard fitting is 14mm.

The damn Snap On is 15mm. That's why I had to machine a couple of adapters out.:mad:
 
You must log in or register to reply here.
Back
Top