Cost to install outdoor water faucet?

05RLS2

New member
Joined
Jan 24, 2011
Messages
213
Reaction score
0
I have been looking lately at buying a house, and found a couple that I like. One of them has a few things that I really like, while a couple other things that I don't and will need to add for sure if I decide to purchase it. One of those things, there is not a single outside house facuet anywhere on the house. How anyone can build a house without at least one outdoor faucet is beyond me, but oh well I won't do without one.

I called a couple plumbers to give me a rough estimate on the cost to install a faucet close to the garage, but they couldn't really give me one unless they came out and looked at the house. Since I don't own the home, I can't really have them come out to give me a cost. I know it's really just going to come down on where the water line is at, where they can tap it into, and parts and labor costs to really determine it. For those that have had one installed or do plumbing work, can you all give me an average cost to add an outdoor faucet?
 
There are really too many variables for anyone to say. One thing I would highly recommend if your intent is to wash your car with it is to have it added as part of a water softener installation. Then, the delta cost is pretty small, generally not much more than the hose bib. Of course, the hose will not really be outside, which has it's own advantages and disadvantages. One advantage that I like is the water will tend to be warmer.
 
I am not really a fan of water softners at all, but I'd plan on installing a whole house water filtration system. I can do that myself no problem, since those are fairly easy. Now you having me thinking with not actually having the hose facet outside, but rather in the garage with hot and cold water outlets.:drool:

Basicaly I was just wondering for a simple outdoor faucet could average around a few hundred dollars, or $1K or more. I have never had any experience with plumbers, so I don't really know they price their work to begin with
 
If the house has a crawl space space go down, cut a supply line, install a Gator or Shark Bite T, and run a pex line to the garage, and put a hose bib in the garage and a hose mount...

Go to Lowe's or HD and do a supply parts check, not hard to do...

Home owner, no plumber can give you an estimate on this...

Pex is flex easy to move...

Turn the water off FIRST...

You can also put a floor drain in a garage...that is another show..
 
I had a quote done for one a few wks ago. I was told $500-600.
 
I had a quote done for one a few wks ago. I was told $500-600.

Ryan,

$500 to $600 for one faucet? Would they have to run long lengths of piping? This seems a tad expensive.

Here in the North it's a good idea to install a Frost-proof, anti-siphon faucet in order to avoid headaches. The last time I looked, a good one was priced "about" $50 at Lowe's.
 
Ryan -
I'm surprised at the cost also. While there are too many variables to account for the quoted $500-600 you received seems high.


I have a quote to replace 2 existing faucets that was $150 including parts and labor. Admittedly this is a replacement versus adding a new faucet so it may be apples to oranges.

The most expensive part is the faucet itself and as several have pointed out you can get those at Lowes/Home_Depot/Menards for around $40 a piece and that's the anti-siphon "frost proof" variety.

Good luck with your home purchase and keep us updated on what you decide.

Mike
 
It probably isnt a 5-600 job thats why i havent pursued it. Basically I want a hot and cold water faucet in my garage on the same wall as my washer water outlets are on. It wouldnt be much length of pipe to run. Biggest thing is tearing into the wall.
 
OH OK, seeing that you'll be running both hot and cold water plus tearing into a wall I can see the cost..
 
you could always consider a very long hose and your neighbors spigot. (just joking)

Sounds like it might be easier, and cheaper, to use ONR washes and a bucket of water you can carry from inside the home.
 
Why not wait till you buy the home, trade people do not like to waste their time giving estimates, and when you tell them you do not own it, they know it is a time waster.

As for finding someone, as a landlord I can tell you many trade people work on the side, and running a H&C water line is not a big problem, the PEX lines are flexible, spend some time at Lowe's and you might even meet a plumber...it is a DIY project.

Houses will vacuum your pockets, faster than a vehicle.
 
PEX is tubing, just like a hose, not joking....

This stuff is great to work with and other than sweating an adapter to the existing copper pipe it's simple and easy....:props:
 
Gator bites eliminate the need for sweating, they make a T and you just push it on, and it digs in...even the water does not need to be out of the pipe...they are about $12 for each T, but cheaper than a plumber, who just stick bread down the pipe and sweats it.

Lowe's has tons of different fittings with Gator Bites..and they connect to PES, PVC and even copper. There is a contractors board if you are interested in things like this..
 
Main reason why I wanted to run the hot and cold line was to add a wash tub in the garage and to be able to hose off the garage floor (all year round) and not have to run 100ft of hose from the side of the house.
 
I have a hose bib in the garage, grabbed it off the irrigation supply, I still back the vehicles out and use the pressure washer, however the drive is up a hill, and do not want it to be slick...Indy has no salt..

Check out at Costco, they have a nice laundry sink.
 
I have a hose bib in the garage, grabbed it off the irrigation supply, I still back the vehicles out and use the pressure washer, however the drive is up a hill, and do not want it to be slick...Indy has no salt..

Check out at Costco, they have a nice laundry sink.

Yea but we have plenty of ice :(
 
Back
Top