Couple Questions

[crazycrew]

OK, First off Hello to All. I think this is my first post.

How does the order of these sound?

1. WASh Truck
2. Clay bar (Griots)
3. Swirl Remover (Wolfgang Total Swirl remover 3.0)
4. Finishing Glaze (Wolfgang 3.0)
5. Paint Sealant (Griots Garage)

Also, Which pads to use with each? I ahve the 7424 DA

Sorry for all the ? I need to do something w/ that red truck of mine!!

Thanks, Brooks

 

[Nappers]

:welcome: to AG,

I like the Meguiar's pads and backing plates.....

8207 for paint correction and 9207 for waxing and light correction. There are a ton of pad selections with Lake County, Edge and what not,

I use Meguiar's products and not familiar with Griots or Wolfgang but looks like your in the right direction.


Just be sure to do a test spot in a small area and get your process dialed in so you don't do the whole car and not like the results.


Have fun!

 

[Bunky]

The usual start is a polishing pad (LC white) with the TSR and move up to light cutting (LC orange) if you are not getting results on your test spot. For the FG use a finishing pad (LC Black). The FG cannot do much correction ability.