Marc08EX
New member
- May 10, 2008
- 4,108
- 0
Wheels/Tires:
Meguiar's Deep Crystal on wheels
Meguiar's APC+ on tires
Meguiar's Cleaner Wax on wheels
Meguiar's Hyper Dressing on tires
Wash:
Gilmour Foam Gun with Meguiar's Gold Class
Chemical Guys Citrus Wash and Gloss
Meguiar's Microfiber Wash Mitt
Clay:
Meguiar's OTC Clay
Meguiar's Last Touch
Paint Correction:
Flex 3401 VRG
Menzerna Super Intensive Polish / LC Orange Pad
Menzerna Nano Polish (106FF) / LC White Pad
Craftsman 500W Halogen Lights
LSP:
Autoglym HD Wax
I'm sorry I don't have any before pictures because the car wasn't dirty at all when I started.
Before Paint Correction Pics:
The swirl marks weren't so bad at all. This car has been well maintained and washed using the 2 bucket method most of the time. I started the paint correction process by using the least aggressive method so I started with the Menz 106FF paired with the LC white polishing pad. This barely did anything at all. So I stepped it up to the Menz SIP with the LC orange light cutting pad. This removed all the swirl marks except some RIDS. Each panel was corrected using the Menz SIP / LC orange followed by Menz 106FF / LC white.
After Paint Correction Pics:
LSP to be used:
Meguiar's Deep Crystal on wheels
Meguiar's APC+ on tires
Meguiar's Cleaner Wax on wheels
Meguiar's Hyper Dressing on tires
Wash:
Gilmour Foam Gun with Meguiar's Gold Class
Chemical Guys Citrus Wash and Gloss
Meguiar's Microfiber Wash Mitt
Clay:
Meguiar's OTC Clay
Meguiar's Last Touch
Paint Correction:
Flex 3401 VRG
Menzerna Super Intensive Polish / LC Orange Pad
Menzerna Nano Polish (106FF) / LC White Pad
Craftsman 500W Halogen Lights
LSP:
Autoglym HD Wax
I'm sorry I don't have any before pictures because the car wasn't dirty at all when I started.
Before Paint Correction Pics:



The swirl marks weren't so bad at all. This car has been well maintained and washed using the 2 bucket method most of the time. I started the paint correction process by using the least aggressive method so I started with the Menz 106FF paired with the LC white polishing pad. This barely did anything at all. So I stepped it up to the Menz SIP with the LC orange light cutting pad. This removed all the swirl marks except some RIDS. Each panel was corrected using the Menz SIP / LC orange followed by Menz 106FF / LC white.
After Paint Correction Pics:










LSP to be used:
