detailing choices polish,wax,etc.

S

spiros

New member
Joined
May 7, 2012
Messages
9
Reaction score
0
Feed back pleasehello im new hear and have searched to find what im looking for but i just get confused with so many opinions,i need to remove swirls,spider,etc. scratches so i will post what i have and please let me know if i need anything else to add to my collection of items.

porter cable 7427
lake country,blue,grey,orange,yellow pads
megs ultimate compound
menzerna PO85RD
pnnacle souveran black/red wax
klasse all in one polish
klasse sealant

Jeep grand cherokee 2011 1 year old red metalic
i was thinking of getting something to complement the menzerna PO85
please send feedback and order of product use
thanks
spiro
 
Welcome to AGO!!

Probably too big a jump from Megs UC to Menz 85RD. 106ff or even 203 might be a better choice.

Klasse leaves a very nice candied look but there is a learning curve associated with HGSG. Be sure to read the posts on that.
 
Welcome To Autogeek Online!!

:iagree:

Mikes spot on with his reply...

Menzerna PO85RD is super fine, one of the finest I know of capable of removing 3000 sanding grit marks.

Menzerna Super Finish PO106FA would also be a great substitute...:props:

Sealants

Wax

 
so PO106 is for cutting first,and then the PO85 to polish?
 
They are both finishing polishes. 106fa has a bit more bite.
 
mjlinane said:
They are both finishing polishes. 106fa has a bit more bite.
Click to expand...
so m yquestoin is, i want a product to use before the PO85 i just wand to stick with 2 items to get rid of the holograms,spiders etc.
 
Normally, unless you have very soft black paint, 85rd is not "needed". If you are intent on doing a 3-step, use 203 on the middle. Then I could pretty much guarantee you'll get the most out of 85rd.
 
mjlinane said:
Normally, unless you have very soft black paint, 85rd is not "needed". If you are intent on doing a 3-step, use 203 on the middle. Then I could pretty much guarantee you'll get the most out of 85rd.
Click to expand...

ok i ordered the 203,would megs UC be used anywere in conjuction with the 205 and PO85?
 
Last edited:
Megs UC is a compound and takes out more serious defects than 203. So start a test spot with 85rd and see if that completely removes the defect. If not, step up to 203 and check. If still not, then use UC. Then work you way back down.
 
mjlinane said:
Megs UC is a compound and takes out more serious defects than 203. So start a test spot with 85rd and see if that completely removes the defect. If not, step up to 203 and check. If still not, then use UC. Then work you way back down.
Click to expand...


nicely said thanks,the porter cable should be at 4 5 or 6 setteing
 
4-5 for polishing (Menz products), 5-6 for UC.

Black for 85rd
white or orange pads for 203
Orange or MF for UC.
 
You must log in or register to reply here.
Back
Top