First time polishing are these holograms?

Bgates222

Bgates222

New member
Joined
Sep 6, 2018
Messages
62
Reaction score
0
Hello if anyone can help I’d appreciate it this is my first time detailing a car I did the wash then clay and polish using chemical guys vss and da polisher then seal and waxed the car. Everything seemed to be good but maybe the next day I noticed a haze on the places I polished,from looking on the internet I think what I missed was the finishing polish and hence the haze o r holograms, can this be fixed with maybe some sort of final finishing polish? Thanks
 
What was and sealant did you use?
How did it look after polish before sealant?
Use anything in between the polish step and the sealant? IPA etc?



Sent from my SM-G965U using Tapatalk
 
I used jetseal and butter wet wax from chemical guys,no IPA I also added Sonax spray and shine a few weeks later the polishing was about a month ago I probably should have mentioned that
 
So it didn't look like this at the time of polishing?

If that's the case probably applied a couple things that just don't play well together. I had collinite 845 do this to me with some sealants and not with others.

Sent from my SM-G965U using Tapatalk
 
No it dint have it at polishing that I can remember, from reading around I thought it might be the final finishing step I missed, I think I have some Sonax perfect finish that’s something I can use for the final step no? Would you advise doing the calling again even tho it was only A month or feel the surface then decide ? Thanks I don’t know how you did that Porsche in 6 hours I was working for 9 hours and couldn’t finish lol
 
By "calling", did you mean claying? If so, not necessary. I agree with custmsprty, looks like DA haze. Perfect finish would be a good finishing polish. Be sure to do an IPA wipe down to get rid of the polishing oils before applying your LSP.
 
Rsurfer said:
By "calling", did you mean claying? If so, not necessary. I agree with custmsprty, looks like DA haze. Perfect finish would be a good finishing polish. Be sure to do an IPA wipe down to get rid of the polishing oils before applying your LSP.
Click to expand...
Yes sorry I did mean claying but my Ipad felt that isn’t what I really wanted to type,I’ve read and seen conflicting info on ipa wipe downs is There anything I could use ?
 
What pad did you use to polish the CG vss with?

Could be either DA haze if you used a high cutting pad. And it could be that something gone wrong with your protection products. Did you have that haze when you applyied the Sonax stuff?
 
SWETM said:
What pad did you use to polish the CG vss with?

Could be either DA haze if you used a high cutting pad. And it could be that something gone wrong with your protection products. Did you have that haze when you applyied the Sonax stuff?
Click to expand...
I used a chemical guys hexlogic orange foam pad yes the haze was there when i applied the Sonax
 
Bgates222 said:
Yes sorry I did mean claying but my Ipad felt that isn’t what I really wanted to type,I’ve read and seen conflicting info on ipa wipe downs is There anything I could use ?
Click to expand...
Car Pro's Eraser.
 
You must log in or register to reply here.
Back
Top