Foam cannon attachment

parttimer

parttimer

Active member
Joined
Aug 5, 2013
Messages
1,564
Reaction score
0
Is anyone using a quick connect for their cannon? I don't want to keep unscrewing my wand while switching.

Sent from my Nexus 10 using Tapatalk
 
Yes. Mine just attaches to my hand grip. When done just pop off and attach wand.
 
I got tired of unscrewing my wand as well. I picked up this male connector (on the left) at Home Depot for like $3. They keep them either near the pressure washer or tools section :props:

 
I will probably do the same thing eventually. For my machine it will take one M22 socket and one 1/4"female plug.
 
I have quick connect tips so I guess I Judy need to devise a way to put adapter on the cannon?

Sent from my LG-E970 using Tapatalk 2
 
That's for my greenworks and cleanforce pressure washer what model

Sent from my EVO using Tapatalk
 
The cannon should connect to your 1/4 quick connect. I wanted to take the 12 inch wand out to make the gun shorter.

Sent from my EVO using Tapatalk
 
Its a connection size m22 to a 3/8 quick

Sent from my EVO using Tapatalk
 
Dear ferret

Quick connects are great. I have one on each end of my high pressure hose, one on the end of the garden hose, one to connect to the gun, and one to connect to the lance/foam cannon.

What you will find to be damaging to your washer will be water left inside it after using it. It's great to be able to take off the hose and get almost all of the water out each time.
 
I went and bought the M22 3/8 quick connects this morning for the clean force. The male end fits perfectly on the wand but the female end doesn't fit on the end of the PW hose.
 
I figured it out. I needed to put a female end on the wand, then on the PW hose get a 14mm to 15mm connecter and put the male end on the PW hose.
 
You must log in or register to reply here.
Back
Top