I just cleaned my gas and brake pedals. I would like to protect them and make them look better but nothing slippery. Any suggestions?

[Hal]

I just cleaned my gas and brake pedals. I would like to protect them and make them look better but nothing slippery. Any suggestions?

 

[Setec Astronomy]

The general rule for pedals is the same as for motorcycle tires--no dressings.

I suppose you could use something like Tuf Shine which is completely dry to the touch, but it is still kind of smooth/slippery, hmm....

 

[Sleper]

I clean with simple green. Nice smell an no slippery residue

 

[Silly Rabbit]

I would use just clean them with soap water type deal. Maybe a bit of apc. You do not want to have slippery pedals. I think insurance companies have fantasy dreams about things like this like most people have day dreams about winning the lotto or getting a dream car, lol.

 

[Coatingsarecrack]

Adams ceramic spray coating works on rubber Matt’s and no grease. Test before use of course. Also Koch Chemie Gummifix


Sent from my iPhone using Tapatalk

 

[DFB]

Adams ceramic spray coating works on rubber Matt’s and no grease. Test before use of course. Also Koch Chemie Gummifix


Sent from my iPhone using Tapatalk

I've found Koch Chemie GUF (Gummifix) to be very underwhelming, and that's coming from a Koch Chemie fan. It certainly doesn't induce slipperiness, but then it also doesn't really improve the finish.

 

[DFB]

I just cleaned my gas and brake pedals. I would like to protect them and make them look better but nothing slippery. Any suggestions?

I'm assuming they are just plastic pedals without a metallic finish? If so, something like Solution Finish would be a good option here. Unlike a dressing which simply sits on the surface, this actually penetrates the plastic itself for a semi-permanent finish without creating a slip hazard. You'd clean with an APC and IPA before application. Another option would be ADS Trim+, which is a combined dye and sealant, Solution Finish is a dye only.

 

[Setec Astronomy]

I'm assuming they are just plastic pedals without a metallic finish? If so, something like Solution Finish would be a good option here. Unlike a dressing which simply sits on the surface, this actually penetrates the plastic itself for a semi-permanent finish without creating a slip hazard.

IME pedals are rubber, not plastic, although I see in your picture it looks like you are about to apply it to some rubber trim. Does Solution Finish work on rubber? If so, it would seem like something people would be using on tires, which I never remember hearing.

EDIT: This is what the Google AI says, which seems to contradict itself:

Yes, you can use Solution Finish on most exterior rubber trim, such as window seals, mud flaps, and wiper blades. It absorbs deeply into the pores to restore a rich, deep black without leaving a greasy residue. Always perform a small test spot first, as some very smooth rubbers may not absorb it well.
Keep the following restrictions in mind before applying:

• Avoid Tires: It is not recommended for tires, as it does not bond well to them and will not provide the right look.
• Avoid Interiors: Avoid using it on interior rubber components like floor mats. It can leave a slick, oily residue that creates dangerous slipping hazards on pedals or footwells.

 

[DFB]

IME pedals are rubber, not plastic, although I see in your picture it looks like you are about to apply it to some rubber trim. Does Solution Finish work on rubber? If so, it would seem like something people would be using on tires, which I never remember hearing.

EDIT: This is what the Google AI says, which seems to contradict itself:

Yes, you can use Solution Finish on most exterior rubber trim, such as window seals, mud flaps, and wiper blades. It absorbs deeply into the pores to restore a rich, deep black without leaving a greasy residue. Always perform a small test spot first, as some very smooth rubbers may not absorb it well.
Keep the following restrictions in mind before applying:

• Avoid Tires: It is not recommended for tires, as it does not bond well to them and will not provide the right look.
• Avoid Interiors: Avoid using it on interior rubber components like floor mats. It can leave a slick, oily residue that creates dangerous slipping hazards on pedals or footwells.

Depends on the vehicle. My Ranger has rubber brake and clutch pedal pads, but the throttle is hard plastic, most cars are like that.

Be careful what you take on board when it comes to Google AI, I regularily catch it out for making assumptions rather than hard facts.

I've used Solution Finish on rubber and it works very well. Because of how its absorbed, it doesn't leave "oily residue" behind as suggested by AI. On tyres, it's not economically viable.

 

[Setec Astronomy]

Depends on the vehicle. My Ranger has rubber brake and clutch pedal pads, but the throttle is hard plastic, most cars are like that.

Yes, I think most cars are like that, I was thinking of brake pedals.

Be careful what you take on board when it comes to Google AI, I regularily catch it out for making assumptions rather than hard facts.

I think we all need to be careful with AI. That summary was an amalgamation of 5 different sources.

I've used Solution Finish on rubber and it works very well. Because of how its absorbed, it doesn't leave "oily residue" behind as suggested by AI. On tyres, it's not economically viable.

Maybe Solution Finish is a lot more expensive in Australia; TRC just had the 12oz bottle on sale for $19 US, that would seem to me to be competitive with other tire coatings, even at the regular $28 price.

 

[Coatingsarecrack]

I've found Koch Chemie GUF (Gummifix) to be very underwhelming, and that's coming from a Koch Chemie fan. It certainly doesn't induce slipperiness, but then it also doesn't really improve the finish.

I you can get the Adam’s grape spray coating, give it a try.


Sent from my iPhone using Tapatalk

 

[Tasmania]

I'd just give them a nice weekly clean because whatever you put on is only going to transfer onto the sole of your shoes eventually.

Just my 2 cents worth.