Congrats on the purchase of Klasse SG, or KSG as I like to refer to it as. Here's a simple way to properly use KSG for best results for application and removal:
-get yourself a bowl and add some water in it.
-I prefer a square cotton applicator, foam seems to not slide across the paint as well.
-find a small spray bottle, like 4 oz or so.
-dunk the applicator into the bowl of water, then pour some KSG into your small spray bottle.
-wring out the cotton applicator, making sure its damp but NOT dripping wet.
-depending upon the size of the panel and/or section your working on 1-2 sprays is more than enough. Wipe the KSG in from left to right, up and down, work it in real good.
-WIPE OFF RIGHT AWAY! This product is acylic, NO need for it to set up, anyone who says you leave it on the car does NOT know how to use it.
-Keep the applicator damp, it makes spreading KSG alot easier, easier is key when using KSG.
-DO NOT USE ON GLASS, its VERY hard to remove for some reason.
-Once your done the car will look great but the key is a 2nd coat, that needs to be applied 12 hrs later as KSG is acrylic it needs time to cure, 12 hrs is the shortest amount of time, the 2nd coat really makes the paint poprops:
To help maintain inbetween coats of KSG I like to make up a gallon of quick detailer using rinseless wash, adding 2 oz's of KSG into a made up gallon. This not only makes clean ups easier but you also end up adding another layer of KSG, albeit a thin layer for sure.
