Layering BFWD with WG3.0

[New Image]

Just as the title says, can I lay down BFWD and follow up with a WG3.0?

Car is 08 BMW 3 series Black.

 

[Buckskincolt]

Sure why not, just let the Blackfire fully cure first before topping.

 

[truckbutt]

Just as the title says, can I lay down BFWD and follow up with a WG3.0?

Car is 08 BMW 3 series Black.

Why would you want to? They are both sealants and when you cover the BFWD with WG 3.0 you may lose the slick wet look that BFWD gives. Just my 2c, but I would do a second coat of BFWD 12 hours after the first and enjoy the slick wet shine.

 

[rider9195]

Why would you want to? They are both sealants and when you cover the BFWD with WG 3.0 you may lose the slick wet look that BFWD gives. Just my 2c, but I would do a second coat of BFWD 12 hours after the first and enjoy the slick wet shine.

:iagree:

Then after that top with Midnight Sun and you have a killer combo.

 

[RoadRageDetail]

:iagree:

Then after that top with Midnight Sun and you have a killer combo.

^^^^ for example:

Two coats BFWD followed by BFMS. I do recommend keeping the paint cool as long as possible following wax application, overnight if possible. If it gets hot too soon then you will have bonding issues.