Menzerna Product Selection

A

AZpolisher15

New member
Joined
Nov 9, 2015
Messages
1,419
Reaction score
0
Q1: For a daily driver (1 year old) with very few swirls, should I be looking at a finishing polish or a medium cut polish in the attached chart?

Q2: products are labeled "standard", "special", or "alternative" in the attached chart. If I wanted to have a "set" of products to be prepared for whatever comes my way in my family and friends vehicles, should i choose the following "standard" products?
- heavy cut compound 1000
- medium cut polish 2500
- final finish 3000

After considerable research, and several hours wading through menzerna-related posts, those are the three products that sound most practical. LSP of choice would be, of course, power lock sealant. I'd appreciate any insight. Thanks!
 
A1: You should have both on hand and start off with SF4000 with a polishing pad for a test spot. If that does not meet your goal, you can go down to PF2500 again with the white pad.

A2: For a "set" of products to have on hand I would start with FG400, PF2500, and SF4000. This will get you going in the right direction. You can add more later on down the line as need be.

Don't hesitate to ask questions.
http://www.autogeekonline.net/forum...nding-menzerna-headquarters-tech-academy.html
 
Mike@DedicatedPerfection said:
A1: You should have both on hand and start off with SF4000 with a polishing pad for a test spot. If that does not meet your goal, you can go down to PF2500 again with the white pad.

A2: For a "set" of products to have on hand I would start with FG400, PF2500, and SF4000. This will get you going in the right direction. You can add more later on down the line as need be.

Don't hesitate to ask questions.
http://www.autogeekonline.net/forum...nding-menzerna-headquarters-tech-academy.html
Click to expand...
Re: Menzerna Product Selection
Thanks for your time, Mike. Much appreciated. Very cool trip you had! I've heard a lot of good things about Menz. As I'm picking up on this "hobby", and knowing it will extend well beyond my own vehicle, I'd like to develop a system for myself so effects of relative and subtle adjustments are recognizable (and repeatable!). I'd like to stick with one brand to accomplish this and Menz seems to offer a lot of flexibility. Just trying to learn as much as I can, basically.

Why do you suggest SF4000 over FF3000? I'm not at all in disagreement- I know nothing about these products except what I'm reading from the forum, AG's description, and the Menz website.

Oh, and Ive also never even held a DA in my hands! My GG6 is ordered and on its way. Your input is appreciated.
 
http://www.autogeekonline.net/forum/auto-detailing-101/77155-my-technique-concerning-3401-menzerna-products-hybrid-pads.html

This is a good read from Mike. You may want to change some things based on your machine but post help me make up my mind. I have been usin a Flex 3401 for a few years at work so I wanted to stick with that when venturing out on my own. I did want to offer a higher end detail and this article really helped me pick out my starting line. Haven't gotten to put it to use yet though.
 
Boejoula said:
http://www.autogeekonline.net/forum/auto-detailing-101/77155-my-technique-concerning-3401-menzerna-products-hybrid-pads.html

This is a good read from Mike. You may want to change some things based on your machine but post help me make up my mind. I have been usin a Flex 3401 for a few years at work so I wanted to stick with that when venturing out on my own. I did want to offer a higher end detail and this article really helped me pick out my starting line. Haven't gotten to put it to use yet though.
Click to expand...
Yup, good read. Thanks!
 
Harpolith said:
Re: Menzerna Product Selection
Thanks for your time, Mike. Much appreciated. Very cool trip you had! I've heard a lot of good things about Menz. As I'm picking up on this "hobby", and knowing it will extend well beyond my own vehicle, I'd like to develop a system for myself so effects of relative and subtle adjustments are recognizable (and repeatable!). I'd like to stick with one brand to accomplish this and Menz seems to offer a lot of flexibility. Just trying to learn as much as I can, basically.

Why do you suggest SF4000 over FF3000? I'm not at all in disagreement- I know nothing about these products except what I'm reading from the forum, AG's description, and the Menz website.

Oh, and Ive also never even held a DA in my hands! My GG6 is ordered and on its way. Your input is appreciated.
Click to expand...

No problem. Thanks!

I would say Menzerna offers the most flexibility of any polish manufacture. After all, this is what they specialize in. They also supply the major German Automobile manufactures. This is the product line they use on the assembly lines.

I suggest SF4000 over FF3000 as SF4000 will finish out better than FF3000. SF4000 also has a bit more cut in it than people think (FF3000 as well) and can finish out some pretty heavy halograms and defects from the first compounding step and doubles as a decent one step polish with incredible finishing abilities. Of course the Flex 3401 adds to that level of added bite.

For instance, I can compound the paint with the PE14, Hybrid wool pad and Menzerna SC300. While this is very potent and will eat defects alive, it can and will leave the dreaded halograms. My next step will be the 3401 equipped with the white Hybrid pad and SF4000. This second step has the power and ability to clear up anything from the first heavy compounding step and will finish up LSP ready.

If you haven't ordered pads yet, I would recommend the new Lake Country thin pro pads. They feature Hybrid foam technology as found in the Hybrid pad line. For Flex machines I use the Hybrids. For normal DA machines I would use the thin pro pads.
Lake Country ThinPro Foam Pad System New for 2016!


Boejoula said:
http://www.autogeekonline.net/forum...rning-3401-menzerna-products-hybrid-pads.html

This is a good read from Mike. You may want to change some things based on your machine but post help me make up my mind. I have been usin a Flex 3401 for a few years at work so I wanted to stick with that when venturing out on my own. I did want to offer a higher end detail and this article really helped me pick out my starting line. Haven't gotten to put it to use yet though.
Click to expand...

Thanks for bringing that up.

Let me know how me works out for you on the smack technique thread.
 
Mike@DedicatedPerfection said:
No problem. Thanks!

I would say Menzerna offers the most flexibility of any polish manufacture. After all, this is what they specialize in. They also supply the major German Automobile manufactures. This is the product line they use on the assembly lines.

I suggest SF4000 over FF3000 as SF4000 will finish out better than FF3000. SF4000 also has a bit more cut in it than people think (FF3000 as well) and can finish out some pretty heavy halograms and defects from the first compounding step and doubles as a decent one step polish with incredible finishing abilities. Of course the Flex 3401 adds to that level of added bite.

For instance, I can compound the paint with the PE14, Hybrid wool pad and Menzerna SC300. While this is very potent and will eat defects alive, it can and will leave the dreaded halograms. My next step will be the 3401 equipped with the white Hybrid pad and SF4000. This second step has the power and ability to clear up anything from the first heavy compounding step and will finish up LSP ready.

If you haven't ordered pads yet, I would recommend the new Lake Country thin pro pads. They feature Hybrid foam technology as found in the Hybrid pad line. For Flex machines I use the Hybrids. For normal DA machines I would use the thin pro pads.
Lake Country ThinPro Foam Pad System New for 2016!




Thanks for bringing that up.

Let me know how me works out for you on the smack technique thread.
Click to expand...

Can you link the thread. I can't seem to find it right now.

Edit: Just realized that is the thread... Thought it said "smack technique" somewhere in the first post. Maybe that was a different thread referring to the one I posted yesterday..... Way to early in the morning for me.
 
Harpolith said:
should i choose the following "standard" products?
- heavy cut compound 1000
- medium cut polish 2500
- final finish 3000
Click to expand...

Unless they have been updated, the reason people are steering you away from Power Gloss (Heavy Cut Compound 1000) and FF (Final Finish 3000) are because those are the older technology products that don't have the performance combination of the newer, more expensive products.
 
Mike@DedicatedPerfection said:
No problem. Thanks!

I would say Menzerna offers the most flexibility of any polish manufacture. After all, this is what they specialize in. They also supply the major German Automobile manufactures. This is the product line they use on the assembly lines.

I suggest SF4000 over FF3000 as SF4000 will finish out better than FF3000. SF4000 also has a bit more cut in it than people think (FF3000 as well) and can finish out some pretty heavy halograms and defects from the first compounding step and doubles as a decent one step polish with incredible finishing abilities. Of course the Flex 3401 adds to that level of added bite.

For instance, I can compound the paint with the PE14, Hybrid wool pad and Menzerna SC300. While this is very potent and will eat defects alive, it can and will leave the dreaded halograms. My next step will be the 3401 equipped with the white Hybrid pad and SF4000. This second step has the power and ability to clear up anything from the first heavy compounding step and will finish up LSP ready.

If you haven't ordered pads yet, I would recommend the new Lake Country thin pro pads. They feature Hybrid foam technology as found in the Hybrid pad line. For Flex machines I use the Hybrids. For normal DA machines I would use the thin pro pads.
Lake Country ThinPro Foam Pad System New for 2016!




Thanks for bringing that up.

Let me know how me works out for you on the smack technique thread.
Click to expand...
Thanks for the guidance, Mike. Very much appreciated.
 
Setec Astronomy said:
Unless they have been updated, the reason people are steering you away from Power Gloss (Heavy Cut Compound 1000) and FF (Final Finish 3000) are because those are the older technology products that don't have the performance combination of the newer, more expensive products.
Click to expand...

Thank you. Good to know. Can you mention some benefits of the newer tech products in addition to what Mike mentioned above?
 
Mike@DedicatedPerfection said:
No problem. Thanks!

I would say Menzerna offers the most flexibility of any polish manufacture. After all, this is what they specialize in. They also supply the major German Automobile manufactures. This is the product line they use on the assembly lines.

I suggest SF4000 over FF3000 as SF4000 will finish out better than FF3000. SF4000 also has a bit more cut in it than people think (FF3000 as well) and can finish out some pretty heavy halograms and defects from the first compounding step and doubles as a decent one step polish with incredible finishing abilities. Of course the Flex 3401 adds to that level of added bite.

For instance, I can compound the paint with the PE14, Hybrid wool pad and Menzerna SC300. While this is very potent and will eat defects alive, it can and will leave the dreaded halograms. My next step will be the 3401 equipped with the white Hybrid pad and SF4000. This second step has the power and ability to clear up anything from the first heavy compounding step and will finish up LSP ready.

If you haven't ordered pads yet, I would recommend the new Lake Country thin pro pads. They feature Hybrid foam technology as found in the Hybrid pad line. For Flex machines I use the Hybrids. For normal DA machines I would use the thin pro pads.
Lake Country ThinPro Foam Pad System New for 2016!




Thanks for bringing that up.

Let me know how me works out for you on the smack technique thread.
Click to expand...
While you're suggesting SF4000, can I assume the same applies to SF3500 (the "new and improved" version of SF4000)?
Menzerna Nano Polish PO 106 FA, Menzerna Final Polish, Nano abrasives, finishing polish, professional polish
 
Harpolith said:
Thank you. Good to know. Can you mention some benefits of the newer tech products in addition to what Mike mentioned above?
Click to expand...

Well, it's become a bit muddled over the years, but the newer products were originally introduced for use on the Ceramiclear paints which were markedly harder than regular clearcoat. The type of abrasive apparently was smaller and sharper...enthusiasts quickly found that these Ceramiclear polishes worked great on regular paints, cut fast but left a much better finish than contemporary polishes, for the amount of cut.

So that's it in a nutshell, the newer tech products cut better but leave a better finish. As an example, if you look at the AG store page for Menzerna, you can see that Power Gloss (PG 1000) which was the compound in the line back in the day, has a cut of 8 and a gloss of 5. Move up to FG 400, and your cut goes up to 9, but instead of losing gloss, it's increased from PG up to a 7. More cut, better finish. Of course, you pay a price premium as a quart of PG lists for $30, while FG 400 is $50.
 
Setec Astronomy said:
Well, it's become a bit muddled over the years, but the newer products were originally introduced for use on the Ceramiclear paints which were markedly harder than regular clearcoat. The type of abrasive apparently was smaller and sharper...enthusiasts quickly found that these Ceramiclear polishes worked great on regular paints, cut fast but left a much better finish than contemporary polishes, for the amount of cut.

So that's it in a nutshell, the newer tech products cut better but leave a better finish. As an example, if you look at the AG store page for Menzerna, you can see that Power Gloss (PG 1000) which was the compound in the line back in the day, has a cut of 8 and a gloss of 5. Move up to FG 400, and your cut goes up to 9, but instead of losing gloss, it's increased from PG up to a 7. More cut, better finish. Of course, you pay a price premium as a quart of PG lists for $30, while FG 400 is $50.
Click to expand...
Thanks, again. The reason I selected the three products in my original post was because the other ones sounded to me like they were more appropriate for ceramic clear, according to the AG descriptions. By default, I thought the 1000 and 3000 would be better choices for me.

Thanks to you and Mike for setting me straight. I think I'll go ahead and order the FG400 and PF2500.

As for a finishing polish, not yet sure whether I should select the
SF4000 or the "new and improved" version, SF3500. Do either of you have any thoughts on this?
 
Harpolith said:
While you're suggesting SF4000, can I assume the same applies to SF3500 (the "new and improved" version of SF4000)?
Menzerna Nano Polish PO 106 FA, Menzerna Final Polish, Nano abrasives, finishing polish, professional polish
Click to expand...

Harpolith said:
As for a finishing polish, not yet sure whether I should select the
SF4000 or the "new and improved" version, SF3500. Do either of you have any thoughts on this?
Click to expand...

I just have a habit of calling it SF4000 (old name). It is in fact SF3500 now and is the same product as before. Only thing different now is the labels.
 
You must log in or register to reply here.
Back
Top