Is this normal. I just got my backing plate and it spins perfectly circular but it is off center. It is a harbour freight brand if anyone has used one.
https://ibb.co/m2iLUG
https://ibb.co/m2iLUG
My polisher is off center..
- Thread starter 01AUDI
- Start date
FUNX650
New member
- Dec 1, 2010
- 21,057
- 1
Normal?
Yes...If it meets the below criteria.
•Is that HF-polisher a dual action (DA)
polisher...[Often also referred to as a
random orbit (RO) polisher]? Yes?
Then:
-Because of the DA polisher’s inherent
oscillation pattern, the pad “swings out”
as it orbits around the center of the ma-
chine. The amount that the pad swings
out from the center of the machine is
known as its “throw”.
Note:
If the answer above was No; then:
you probably have a Rotary polisher
and something ain’t right. Take it back.
Bob
Yes...If it meets the below criteria.
•Is that HF-polisher a dual action (DA)
polisher...[Often also referred to as a
random orbit (RO) polisher]? Yes?
Then:
-Because of the DA polisher’s inherent
oscillation pattern, the pad “swings out”
as it orbits around the center of the ma-
chine. The amount that the pad swings
out from the center of the machine is
known as its “throw”.
Note:
If the answer above was No; then:
you probably have a Rotary polisher
and something ain’t right. Take it back.
Bob
Kamakaz1961
New member
- Aug 23, 2013
- 4,389
- 0
If it is any free float DA that is normal. Make sure you mark your backing plate with a stripe to see it spin while it oscillates. That is why your DA is not centered. It is for the oscillation of the DA.
TMQ
Active member
- Mar 4, 2015
- 2,243
- 0
Lol...Thats ok.
This place is a safe place for all of us!
Even I, from time to time, will post something embarrassing.
You're good.
Tom
It's better to ask one more time than not asking. It can be decieving when the free spinning backing plate is moving of center. The electric motor spinn the of centered part of the oscillation. And it's makes the backing plate spinning by the force of that rotation. Which makes it safe when put pressure on the da that the free spinning backing plate is stop spinning and it's only oscillates. That's why it can be hard to see if the backing plate has stopped spinning since the off center part is still rotating. And that's why it's a simple way to see the backing plate spinning or not to mark the backing plate with a marking pen or a stripe. That is the next thing to understand and learn to see and is best to get knowing by testing on the car or a crap yard panel. To see how it works when polishing on a none flat panel and or what pressure it takes to let it spinning.