OK, Silly question.........

PaulMys

PaulMys

Active member
Joined
Jan 14, 2014
Messages
10,772
Reaction score
3
Sorry if this seems elementary, but I know you guys will help me.

Trying Klasse AIO for the first time ever. Recommendation is to use a "Slightly dampened" cloth or applicator. I'm assuming the applicator should be dampened with a quick detailer?

Sorry, guys. I searched & searched. Just want this to go off without a hitch.
 
PaulMys said:
Sorry if this seems elementary, but I know you guys will help me.

Trying Klasse AIO for the first time ever. Recommendation is to use a "Slightly dampened" cloth or applicator. I'm assuming the applicator should be dampened with a quick detailer?

Sorry, guys. I searched & searched. Just want this to go off without a hitch.
Click to expand...

Kool Aid will do. J/J just plain old H2O.:props:
 
Do you recommend a certain flavor Kool-aid? Lol

Thanks, Rsurfer. So just a spritz on a MF app. pad per panel?
 
Just run water over the applicator and squeeze out ALL excess water.
 
And when i have used that technique it was only when i first started the application i.e. first section panel/area. I never felt the need to continue any distilled water or QD spritzes as i went along and around the vehicle as the product saturates the applicator after a while. I also use less product after the first few sections because of product "build up" in the applicator.
 
Puckman said:
And when i have used that technique it was only when i first started the application i.e. first section panel/area. I never felt the need to continue any distilled water or QD spritzes as i went along and around the vehicle as the product saturates the applicator after a while. I also use less product after the first few sections because of product "build up" in the applicator.
Click to expand...

Makes sense. Thank you for the input Puckman. :)
 
Puckman said:
And when i have used that technique it was only when i first started the application i.e. first section panel/area. I never felt the need to continue any distilled water or QD spritzes as i went along and around the vehicle as the product saturates the applicator after a while. I also use less product after the first few sections because of product "build up" in the applicator.
Click to expand...

Thanks to all that replied to my question, much thanks!

Puck, you hit the nail right on the head, brother. My application went off without a hitch. It went exactly like you described it above. :dblthumb2: Klasse is a winner!

Thank you!!!!!!
 
You'll find we are a helpful bunch around here :dblthumb2: glad to hear it went well for you.
 
You must log in or register to reply here.
Back
Top