ONR before Menzerna PF2500

[wanabe detailer]

I have light swirling and would like to correct with PF 2500. I would like to do ONR wash prior to correction. Would the wash be enough or do I have to remove existing wax, sealant with something else. Seems to me if polish will remove swirls it should easily cut through existing LSP.

 

[poweraid]

I have light swirling and would like to correct with PF 2500. I would like to do ONR wash prior to correction. Would the wash be enough or do I have to remove existing wax, sealant with something else. Seems to me if polish will remove swirls it should easily cut through existing LSP.

light swirls and u need to use power finish ? do you have something with less cut to try first ? def do a wash before you polish , check to make sure if u need to clay also . polishing will remove your current lsp .

 

[wanabe detailer]

poweraid, I will wash and clay. I just did not see the need to strip current lsp. I will probably also start with ccs white and Sf4500 to see if that works on swirls. Thanks for your reply

 

[Andr3wilson]

Well Claying will strip the LSP itself. Personally when I am compounding or polishing I spritz the area with ONR to clean the dust, dirt, and compounding dust before I start polishing. It is good practice because it eliminates the chance of dirt getting into the pad.