P&S Dream Maker review

Klasse Act

Well-known member
Joined
Feb 21, 2012
Messages
27,432
Reaction score
2,326
I found out about this product through Guz's YouTube channel a couple days ago and decided to buy it.

I've had nothing but great things to say about the P&S products I've tried/used the past couple years (Beadmaker/Paint Gloss/Pearl) so this product intrigued me.

I ordered through Amazon and was fulfilled through PBMG, quick delivery! Just hours before application I performed a WW using Feynlab RW mixed up as a WW, so my paint was clean.

Now it's 80 degrees and hazy sunshine, so I did one panel at a time. For application I used a Griot's Garage PFM turquoise towel, great for this product!! I sprayed 2-3 times depending upon the panel and worked it in, very easy to apply After the 1st fender it had a bit more "crispness" to it, aka additional clarity or "pop".

At this point I'm satisfied with the purchase...I'll go onto say this too, it WILL replace Beadmaker and Paint Gloss in the P&S line up for me. Just to be clear here, I like Beadmaker and Paint Gloss but I've got many other products that do what Beadmaker does, PLUS Paint Gloss is just that, Paint Gloss, so Dream Maker makes it obsolete without a doubt.

I'm hopefull that Dream Maker is offered in the gallon size at some point as it's just a smarter purchase for someone like myself. The pictures don't capture the uptick in Gloss, so you'll have to take my word for it guys (if my word means anything to anyone)

In closing I'll say this too, on a light colored car like white, silver or light gray you "may not" notice the uptick in Gloss like I did on my Electric Blue Elantra Sport but I think if your really intune with your paint you'll see the difference! Give it a shot and would love to hear the thoughts of someone who's either used it already or has ordered it
994ab38f69983decbaf174a48e08e9e8.jpg
055b8fc89a5a7df80913cbdac201c2e4.jpg
33607758d94339286192c73ffe129c24.jpg
b3a2a33e8cd284b4d20eebb7105842ab.jpg
6cdc457abbc12a227223ba52e135a21c.jpg
0e40f6ea023b45b9dc2fb2db66da3e4c.jpg


Sent from my SM-G991U using Tapatalk
 
Looking good. Enjoy it. Also I just heard that it will alter the hydrophobics to be sheeting until it wears off.
 
What are you using it over? The 303 graphene?

Lol.... everything! He has a Tac Systems ceramic coating which removes or atleast degrades all toppers.

The 303 graphene is more sealant than coating so i’m guessingcas much as he uses Fenylab RW I’m guessing close to bare coating?


Sent from my iPhone using Tapatalk
 
What are you using it over? The 303 graphene?
Well like Crack said I do have TAC system ceramic coating on my car, applied it June of 2020. This is the Power Plus product from TAC system. Since then it's been topped and re-topped with MANY products. Last week inparticular I did a CarPro Lift wash and then applied a coat of Adam's spray graphene to it and let it cure, so to answer your question my most current LSP is the Adam's spray graphene.

Sent from my SM-G991U using Tapatalk
 
Looking good. Enjoy it. Also I just heard that it will alter the hydrophobics to be sheeting until it wears off.
Did they mention this important factoid on the Rag Company's Thursday YouTube channel show, I missed it or is it in their promo YT video

Thanks for the heads up Guz but since it has NO protection I'm thinking it should wash off pretty easily

Sent from my SM-G991U using Tapatalk
 
I told you guys the Renny Doyle lineup is pretty good stuff.
I havent used this so I just ordered a few bottles
Thanks to Klasse Act for another honest review.
BTW the blue on his car just explodes with this stuff. Awesome.

Sent from my SM-G991U using Tapatalk
 
I told you guys the Renny Doyle lineup is pretty good stuff.
I havent used this so I just ordered a few bottles
Thanks to Klasse Act for another honest review.
BTW the blue on his car just explodes with this stuff. Awesome.

Sent from my SM-G991U using Tapatalk
Thanks DieselFan but to be honest here, I stay ontop of my car, so I've got a good starting point That said, it really did "fine tune" the finish I must say and this is something more noticeable on a color, so I'm really looking forward to YOUR experience on that black beauty

Sent from my SM-G991U using Tapatalk
 
The hood shot with 2 suns shows it well. Beautiful.
 
I actually applied it @C&C this morning, back to back day DREAMS

Sent from my SM-G991U using Tapatalk
 
Did they mention this important factoid on the Rag Company's Thursday YouTube channel show, I missed it or is it in their promo YT video

Thanks for the heads up Guz but since it has NO protection I'm thinking it should wash off pretty easily

P&S is now stating it has a little protection in it. Thus the sheeting. Watch the Thursday podcast video from them.
 
***UPDATE***

I last applied Dream Maker this past Sunday morning and it hasn't rained all week but road resurfacing next to my work has got the ES VERY dusty, so today was the day for a wash!

I used IGL Blizzard snow foam in my CG's foam gun and let it dwell while I cleaned my tires/wheels and rinsed everything down and to my surprise I saw beading, GOOD beading. I was expecting sheeting based off of what I heard about. I finished up by adding ANOTHER coat of Dream Maker after doing the Feynlab WW.

Just wanted to keep you guys in the loop

Sent from my SM-G991U using Tapatalk
 
I'm not seeing dream maker listed on Autogeek any longer, was there an issue with the product?
 
I'm not seeing dream maker listed on Autogeek any longer, was there an issue with the product?
It's there.
Search P&S dream maker
I just got my order of dream maker yesterday
f309d6d4999e0869d10cd6e35e42f811.jpg


Sent from my SM-G991U using Tapatalk
 
I'm not seeing dream maker listed on Autogeek any longer, was there an issue with the product?
I wonder if it came down for a minute to add the gallon size?

Sent from my SM-G991U using Tapatalk
 
I still dont see it, any searched terms just bring up Bead Maker. I guess I need more coffee
 
How does it do in regard to dust attraction? Bead Maker in my area seems to attract dust more than comparable products and I wondered if P&S tried to work on that with this new product.
 
Back
Top