Pictures from Mobile Tech Expo 2010

Meghan

Meghan

Super Moderator
Joined
Mar 3, 2006
Messages
15,033
Reaction score
0
Pictures from Mobile Tech Expo 2010


We are currently at Mobile Tech today. Mike taught the first class this morning on DA's and he is currently teaching a Sanding Class!

Pictures will be posted soon, and hope to see some of you in the next few days here.


:)
 
Re: Mobile Tech Expo 2010

Damn you guys for being on the wrong coast. J/K! Can't wait to see the pics!
 
Re: Mobile Tech Expo 2010

Glad to hear you guys got here safe.

I am slammed busy with jobs, but I am trying to get over that way for the expo either tomorrow or Saturday. I'm gonna try to push some things around.
 
Re: Mobile Tech Expo 2010

premium said:
Glad to hear you guys got here safe.

I am slammed busy with jobs, but I am trying to get over that way for the expo either tomorrow or Saturday. I'm gonna try to push some things around.
Click to expand...
I am here. I attended both of Mike's classes today and also Jason Rose's (Meguairs) class in between. The classes were excellent. If anyboby went away with unanwsered questions it was entirely their fault. I had Mike's camera for the "Damp Sanding" demonstration and did not spare coverage.

While the classes were great the real treat started very early. I was there pretty early and got some one on one time with Mike and Meghan. Mike and Meghan are actually nicer than you think they are. From a 7 AM setup they were both going strong at 4 PM. While Mike was teaching Meghan monitored and worked the forum.

People, service, products and good deals. Its a dynamite combination.

I am looking forward to the show tomorrow.
 
Re: Mobile Tech Expo 2010

Was great to see some forum members today at the classes. I took a head count at the first class and for Mike's first Mobile Tech Class he had 60 students.... Not bad at all! Great job Mike! Back at it tomorrow.
 
Last edited:
Re: Mobile Tech Expo 2010

Just another day in paradise... three lanes of I-4 swallowed up by a sinkhole, a duckling dining giant anconda apprehended (with extreme prejudice) by the Osceola Sheriffs Mounted Posse, a forty degree temperature swing... then I arrived in Clearwater and found it... THE NEXT BIG THING!

Ladies and gentlemen, the Meguiar's Unigrit Machine (DA) Damp Sanding system will rock your detailing world! Meghan says it may be available in a month or so... stay tuned.

As always, Mike's instruction and Meghan's hospitality and hard work is so appreciated. AG put on another first class presentation (a couple of them.)

It's always good to see old friends too.
 
Re: Mobile Tech Expo 2010

JohnHenry said:
Just another day in paradise... three lanes of I-4 swallowed up by a sinkhole, a duckling dining giant anconda apprehended (with extreme prejudice) by the Osceola Sheriffs Mounted Posse, a forty degree temperature swing... then I arrived in Clearwater and found it... THE NEXT BIG THING!

Ladies and gentlemen, the Meguiar's Unigrit Machine (DA) Damp Sanding system will rock your detailing world! Meghan says it may be available in a month or so... stay tuned.

As always, Mike's instruction and Meghan's hospitality and hard work is so appreciated. AG put on another first class presentation (a couple of them.)

It's always good to see old friends too.
Click to expand...

Jay when I think of an absolute gentelman you come to mind. A pleasure as always to spend time with you, thank you for helping me unload the truck and for just being you. For those of you that have not met Jay, he is one of a kind. :props:
 
Re: Mobile Tech Expo 2010

Mike doing what he does best!

0375.JPG


0386.JPG



0394.JPG


0410.JPG
 
Re: Mobile Tech Expo 2010

A big thank you to everyone that attended and thank you feslope for playing the role of Photographer with my camera!

Without further ado here are some pictures from today...


Here's our booth, Meghan and Dwayne set this up during our classes today...
MTE002.jpg



Talk about convenient, our demo car is right outside!
MTE003.jpg



Trade shows are a great place to see and learn about tools you don't know about, in this case I'm showing the Flex 3403 as I'll be using this in the Damp-Sanding demonstration to polish with after the compounding step.
MTE004.jpg


I was told the head count was around 60 people for each of our two classes today!
MTE005.jpg



Really nice facilities at the convention center...
MTE006.jpg


MTE007.jpg


MTE008.jpg


MTE009.jpg




Taping of two sections for the Damp Sanding Demonstration using Meguiar's new Unigrit Finishing System. Our donor car, or victim is a black Chevrolet Impala "rental" filled with swirls, scratches and water spots...
MTE010.jpg




In this picture I'm placing the S61500 Unigrit Sanding Disc on the S6F1 Foam Interface Pad which is attached to the S6BP 6" backing plate and the entire system is attached to the new G110v2 Dual Action Polisher. The new Unigrit Finishing System is designed to be used with a 5/16" stroke or orbit which is what the G110v2 offers as does both the Porter Cable 7424XP and the Griot's Garage ROP
MTE011.jpg



Using the Brinkmann Swirl Finder light to show everyone the horrific condition the paint is in before damp-sanding.
MTE012.jpg




Measuring the paint using the Defelsko PosiTest Paint Thickness Gauge
MTE013.jpg


MTE014.jpg


MTE015.jpg


MTE016.jpg




Ready to go...
MTE017.jpg




Ready to use the techniques shared in the class...
MTE018.jpg



2-4 passes to break-in the disc...
MTE019.jpg




Then 2-4 passes after break-in and then stop and inspect.
MTE020.jpg
 
Re: Mobile Tech Expo 2010

Continued...


In this section we sanded first with the 1500 Sanding Disc and then followed with the 3000 Foam Finishing Disc
MTE021.jpg


MTE022.jpg


MTE023.jpg


MTE024.jpg


MTE025.jpg


MTE026.jpg


MTE029.jpg




In the section towards the driver's side fender we only sanded with the Unigrit #3000 Foam Finishing Disc to test the paint and show what could be done with both approaches.
MTE030.jpg


MTE033.jpg




Explaining how the W5000 Double Sided Wool Cutting pad attaches to a rotary buffer using a Double Sided Pad Rotary Buffer Adapter.
MTE034.jpg


MTE035.jpg


MTE036.jpg


MTE037.jpg



Sharing how to pick up a bead or strip of product using the 10 @ 10 Method. Can I get a witness? After each time I picked up a bead of product there was no splatter slung?

:D

MTE038.jpg


MTE039.jpg


MTE040.jpg


MTE041.jpg


MTE042.jpg



Results


Before
MTE045.jpg


MTE046.jpg


MTE047.jpg


MTE048.jpg


MTE049.jpg




100% of the sanding marks were removed with just a few passes of M105 and a wool pad and almost no effort at all.

MTE043.jpg

:)
 
Re: Mobile Tech Expo 2010

Continued...

Next we removed the very light swirls using M205 with a W9207 Foam Finishing Pad

MTE050.jpg


MTE051.jpg




Results....

As discussed in the class, damp sanding add an extra step but the buff-out is faster and with a lot less compounding work required with a rotary buffer. You work cooler and the results were amazing.
MTE052.jpg


MTE053.jpg



Everyone was encouraged to circle around the car and inspect the before and after results for themselves... nothing like a live demonstration on black paint in a real-world example to showcase a new system.
MTE054.jpg


MTE055.jpg


MTE056.jpg


MTE057.jpg


MTE058.jpg


MTE059.jpg


MTE060.jpg


MTE061.jpg



Self-portrait...
MTE062.jpg



Got AG Attire?
MTE063.jpg



:dblthumb2:
 
Re: Mobile Tech Expo 2010

Nice! Now bring ths mobile expo up to Chicago please. In the late sring or summer of course.
 
Re: Mobile Tech Expo 2010

Very cool! Thanks for sharing Mike!


Can't wait to try out the new Megs finishing system! Im the MAN
 
Re: Mobile Tech Expo 2010

Meghan said:
Jay when I think of an absolute gentelman you come to mind. A pleasure as always to spend time with you, thank you for helping me unload the truck and for just being you. For those of you that have not met Jay, he is one of a kind. :props:
Click to expand...


I second that comment!

Thanks for stopping by my shop to say hello today after making your way through the back route home today Jay! Im glad I pulled in just as you were leaving.
 
Re: Mobile Tech Expo 2010

Well we are getting ready to load up for day one of the show, we will share some pictures with you later today.
 
Re: Mobile Tech Expo 2010

I did not notice a picture of this step, but did you just spritz some water onto the surface of the paint and then start sanding with a dry sanding disc? No need to soak the discs with damp sanding?
 
Re: Mobile Tech Expo 2010

Hot dang Mike you sure can make people believers! Too bad I have never used a rotary!
 
Re: Mobile Tech Expo 2010

Thanks for the nice comments, guys.!
 
Re: Mobile Tech Expo 2010

You guys are on the wrong coast come on down to Cali or san diego.
love your stuff
ray
 
You must log in or register to reply here.
Back
Top