Quickest way to detail black car

R

Redfireshaker06

New member
Joined
Feb 24, 2012
Messages
443
Reaction score
0
My girlfriend has a 2012 black Jetta. She lives an hour away and when I see her on the weekends, I don't have enough time to actually polish and wax it and the car majorly needs it. Is there a quick way to do it? Can I just wax, I'm not looking at paint correction at this time. The car just needs to be waxed. I know I could just wax it, but I tried that and the wax would not go on and off easy at all. Any suggestions?
 
Well Claying a black car can inflict marring and scratches that would typically not show up.

If speed and no correction is what you are looking for. Either and all in one like Klasse or glazing and waxing will be the quickest was to hide the imperfections. Although like hiding suggests. It's not very permanent
 
Quickest way would be to do a rinse less wash, clay then use a cleaner wax.

There really isn't a quick way to clean something and do it correctly, it just takes time.
 
I was thinking Wash, Light Clay and the AIO but not really sure about claying a black car w/o polishing.. I'm sure the AIO would hide some of the lighter imperfections.

Maybe CG Blacklight or Blackfire Total Polish and Seal


But not really sure of a shortcut that would look ok.. those are my best suggestions


I hate saying this but maybe turtle wax black box is an option for you.

( all it will do is temporarily hide imperfections ) and wax
 
Wash, clay, xmt 360

Sent from my Galaxy Note II using AG Online
 
Redfireshaker06 said:
My girlfriend has a 2012 black Jetta. She lives an hour away and when I see her on the weekends, I don't have enough time to actually polish and wax it and the car majorly needs it. Is there a quick way to do it? Can I just wax, I'm not looking at paint correction at this time. The car just needs to be waxed. I know I could just wax it, but I tried that and the wax would not go on and off easy at all. Any suggestions?
Click to expand...


If the wax was hard to remove it is possible it was applied to thick. Just a guess.
 
Like stated I would do it in sections. Get to the most needed areas first and use a spray sealant on the areas you aren't doing full correction and LSP. What wax did you use that you said wouldn't go on or come off easily? Have you tested any areas for contamination? Next time you see the car I would do the bag test, after thoroughly washing first. Then do a test spot on an area you can easily check in different lighting. Then I would focus on getting the bumpers and horizontal surfaces done first since those areas see the heaviest wear and contamination on average cars.
If you are looking for a good cleaner wax OTC, Mother's is pretty good/fairly durable IME. At least will give the paint some protection between visits until you can correct all the paint and use a more durable LSP on all surfaces.

Sent from my SAMSUNG-SGH-I897 using AG Online
 
Since you don't have a lot of time, you should trying using a sealant like menzerna powerlock instead of a wax. Its easy to apply and lasts many months.
 
My answer is going to seem strange but hire a detailer maybe an AG detailer to do the work.

Reason being if you only see her on weekends you might want to spend time with her rather than her car. I'm guessing to do the work right it's going to be a 4-6 hour detail. One exception would be if she wants to share the work with you.
 
clay
total polish and seal
crystal seal....

from then on ONR

and crystal seal every couple months...
 
You must log in or register to reply here.
Back
Top