Road paint spatter removal...?

SameGuy

SameGuy

New member
Joined
Jul 1, 2011
Messages
1,927
Reaction score
0
Cleaning up a barn-find 2003 Honda Element DX for my buddy. So far I've restored a cloudy headlamp, fixed a couple of mechanical and electrical issues and mapped out my plan of attack for cleaning the interior and correcting the original paint.

One thing in my way: the driver's side is splattered with yellow center line paint from the front of the wheel well across the length of the rockers, to the rear fender. It's especially heavy on the lower cladding but is pretty much everywhere.

My plan was to start with the mildest product and get more aggressive, but Body Solvent and Tar-X had virtually no effect.

Any idea what I should try next?
 
Mineral spirits worked well for me when my customer's car got splattered with white paint from road construction.
 
Will run down to the garage and try a test spot with OMS right now. Thanks!
 
Krud Kutter Graffiti Remover. It used to be called Road Paint and Graffiti remover so I don't know if the formula changed or not and I'm, not sure how safe it would be on the Element's plastic.

IMAG0072_zpsbbnxoske.jpg

IMAG0073_zpsid9adhi5.jpg


IMAG0074_zpsd4uvojzf.jpg

IMAG0075_zpsikc6zayr.jpg
 
Wow. Better than the first two on the clear, but not by much. It's very very stubborn. The terry is definitely getting colored and the tiniest spots are dissolving but the big splats will take physical effort. On the cladding, yeah, I'll resort to using a paint scraper and hope to do as little damage as possible. Crap.
 
Hey thanks for the Krud Kutter nod, I'll try that next.
 
Before I go and get Amazon to send me some Krud Kutter, do you think Goof Off would do similarly? I can get that at the hardware store down the street.
 
SameGuy said:
Before I go and get Amazon to send me some Krud Kutter, do you think Goof Off would do similarly? I can get that at the hardware store down the street.
Click to expand...

I have never used Goof Off. With Krud Kutter I just sprayed it on, let it sit a few minutes and then wiped with a microfiber.
 
Lacquer thinner will work on clear coated surfaces . As far as the cladding I would try to spray a area with apc with butlye if I spelled it correctly, let it dwell for 3 min ,safely blast it off with pressure washer .Dont use lacquer on cladding or any plastic. That method works every time. I had a customer with a Camry there was oil based overspray all over the car ,the gentlemen took his car to 8 detailing shops none of them had a solution,then he went to my friend, auto body shop .my friend gave the gentlemen my card. The guy called me ,I knew what I was dealing with problematic wise,I charged 750 for 3 hrs work .got it all off with apc and lacquer thinner.Fyi be careful of painted pinstripes. I constantly see members asking about tree sap.lacquer thinner will remove it as fast as you can say Jim .
 
SYMAWD said:
I have never used Goof Off. With Krud Kutter I just sprayed it on, let it sit a few minutes and then wiped with a microfiber.
Click to expand...
I ordered a bottle. Just tried Goof Off, which has xylene among other distillates. Yeah, it was about as effective as OMS. I have lacquer thinner, but I'll try the Krud Kutter first, especially if it works on the plastic. The petroleum products aren't doing the plastic any favors. I may just tell my buddy to cut his losses and order a new rocker skirt panel; my time could be better used doing all the other stuff that needs doing.
 
Try using the pressure washer with the white wide tip that's system has never let me down .that krudd stuff is what I call dummie down product for retail consumers its diluted like down to nothing .go to Home Depot get the purple concrete industrial strength it's made by Zep spray Zep on cladding use a eraraser sponge the n blast residual off
 
GSKR said:
Lacquer thinner will work on clear coated surfaces . As far as the cladding I would try to spray a area with apc with butlye if I spelled it correctly, let it dwell for 3 min ,safely blast it off with pressure washer .Dont use lacquer on cladding or any plastic. That method works every time. I had a customer with a Camry there was oil based overspray all over the car ,the gentlemen took his car to 8 detailing shops none of them had a solution,then he went to my friend, auto body shop .my friend gave the gentlemen my card. The guy called me ,I knew what I was dealing with problematic wise,I charged 750 for 3 hrs work .got it all off with apc and lacquer thinner.Fyi be careful of painted pinstripes. I constantly see members asking about tree sap.lacquer thinner will remove it as fast as you can say Jim .
Click to expand...

Lacquer thinner wont harm clear coat?? (Besides the painted stripes)
 
Just a thought here...Has anyone tried to contact 'their' local highway department and see if they MAY have a solution for road paint?

Bill
 
I'll look into that. In the meantime I've invested in some more stock for my shelves: one bottle of (fantastically expensive) Go Clean Road Paint Remover, a can of Stoner's Xenit and the Krud Kutter. I'm sure I'll use them on projects sooner or later. I also can't find the yellow "holder" for my plastic razor blades. I just today picked up a few gallons of DI water so I'll have a go with the McCulloch steamer tomorrow.
 
BillE said:
Just a thought here...Has anyone tried to contact 'their' local highway department and see if they MAY have a solution for road paint?

Bill
Click to expand...

It's called SOS by State chemical. There's a product called Knock Out also by State Chemical. I'm sure there are other products by other manufacturers. I posted a link to this once before...let me see if I can find it.
 
BillE said:
Just a thought here...Has anyone tried to contact 'their' local highway department and see if they MAY have a solution for road paint?

Bill
Click to expand...


Here you go.

http://www.autogeekonline.net/forum/auto-detailing-101/46305-opti-coat-2-vs-eggs.html

Hoytman said:
There's a product used by the DOT to spray on the new highly reflective road signs to remove the eggs. It's the only thing I've ever seen remove the stains completely. I've got a call in to retrieve the name of this product. As soon as I hear something I'll post the name of the product.
Click to expand...

Hoytman said:
That may be. I've never had to deal eggs on paint, only on the new fangled reflection material on new road signs.

The product is called SOS, and SOS II (2) from State Industrial in Cleveland. It works to also remove graffiti from cars and buildings, sidewalks, marker stains, and works great on egg stains.

My friend just called me with the info off of the can, but I was unsuccessful in finding it in a search. I can buy it from my friend.
Click to expand...


http://www.autogeekonline.net/forum/auto-detailing-101/62869-road-paint.html

Hoytman said:
Works on road paint as well. It's a product used by many DOT departments.
Click to expand...


As I said, I'm sure there are numerous companies that offer similar products. SOS is one I have experience with.

Hope that helps.
 
I looked all over the State site and couldn't find SOS mentioned.
 
You must log in or register to reply here.
Back
Top